Acétal diméthylique de N,N-diméthylformamide, min. 98 %, 5 ml, verre

Catalog nr. 6870.1
Carl Roth

Volume: 5 ml
Value Packs: 1 piece
Prix:
Prix réduit€31,75
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

Le diméthylacétal de N,N-diméthylformamide est un réactif de laboratoire organique fourni avec une pureté minimale de 98 %, de formule brute C₅H₁₃NO₂ et de numéro CAS 4637-24-5. Sa masse molaire est de 119,16 g/mol et sa densité est de 0,895 g/cm³. Sa plage d'ébullition se situe entre 104 et 108 °C, tandis que son point d'éclair est de 6 °C, ce qui nécessite une manipulation prudente de ce liquide inflammable lors des travaux de synthèse. Les données physiques et d'identification du fabricant Carl ROTH incluent le numéro CE 225-063-3 et le numéro ONU 3271, facilitant une identification claire dans les inventaires de laboratoire. Les chimistes utilisent ce composé lorsqu'un diméthylacétal défini de N,N-diméthylformamide est requis pour des transformations contrôlées. Le conditionnement en flacon compact facilite un dosage précis et un stockage dans les conditions réfrigérées spécifiées pour ce matériau. Une pureté constante et des paramètres physico-chimiques documentés en font un choix pratique pour le développement de méthodes et les flux de travail en synthèse organique.

Cet article appartient à la catégorie Solvants de qualité analytique (p.a.), dans Solvants.

Caractéristiques principales

  • Aspect : liquide clair
  • Teneur (CPV) : ≥97 %
  • Teneur (DMF, CPV) : ≤0,3 %
  • Numéro CAS : 4637-24-5
  • Conditionnements : 5 ml, 25 ml, 100 ml, 500 ml
  • Numéro CE : 225-063-3
  • Pureté : min. 98 %
  • Formule brute : C₅H₁₃NO₂
  • Masse molaire : 119,16 g/mol
  • Fiche technique : PDF
  • Fiche de données de sécurité : PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS02GHS05GHS07 Danger

Hazard Statements (H-Phrases)

H225 Highly flammable liquid and vapour
H317 May cause an allergic skin reaction
H318 Causes serious eye damage
H332 Harmful if inhaled

Precautionary Statements (P-Phrases)

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P403+P235 P403+P235 – No description available

Récemment consulté

Vous aimerez peut-être aussi

Questions about Acétal diméthylique de N,N-diméthylformamide, min. 98 %, 5 ml, verre

What is this article?

Acétal diméthylique de N,N-diméthylformamide, min. 98 %, 5 ml, verre is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Analytical grade solvents (p.a.), inside Solvents, in Produits chimiques de laboratoire et industriels.

An analytical-grade solvent, often marked p.a., has impurity limits tight enough for classical analysis and for preparing reagents. It is not automatically low enough in UV absorbance for HPLC, and it is not dry enough for a water-sensitive reaction. The grade is the purchase.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?