Beschrijving
This stainless steel barrel pump has a flexible discharge hose with stopcock for maximum flexibility when filling liquids. The 1.2m discharge hose directs the liquid directly into the desired container. This gives you the freedom to place the container in a convenient position regardless of the position of the drum pump. The stopcock controls the flow of liquid, allowing precise dosing and preventing unwanted spillage. Stainless steel drum pumps are powerful and versatile piston pumps for transferring flammable or aggressive liquids and chemicals.Their electrical conductivity makes the drum pumps ideal for highly flammable or combustible liquids. They have been specially developed for use in zones 0 and 1 (explosion groups II A and II B) and are DEKRA-tested. When used for flammable media, the pumps must be grounded.The PTFE seals not only guarantee high chemical resistance, but also excellent sliding properties during the pumping process.Stainless steel drum pumps are very flexible and versatile. They are ideally suited for a wide variety of drums, containers or other receptacles (approx. 60 to 1000 l capacity, up to 91 cm depth) and are thus true all-rounders in the workshop or production.Compared to conventional solvent pumps for highly flammable liquids, our stainless steel drum pumps offer excellent value for money.The durable and robust drum pumps made of high-quality, corrosion-resistant stainless steel (1.4301) guarantee a long service life, especially in humid or aggressive environments. Filling pump with flexible hose and shut-off valve Ideal for highly flammable or aggressive liquidsMeets the highest safety standardsEconomical and durable Flexibility in the positioning of the filling container Stainless steel drum pumps are electrically conductive and resistant to a wide range of chemicals, enabling safe and efficient transfer or metering of liquids in the chemical, pharmaceutical or food industries. Screw on the discharge hose. Insert the barrel pump with barrel screw connection (accessory) into the barrel and screw in hand-tight. Adjust the delivery tube height if necessary. Hold the discharge hose in the filling container. Open the stopcock on the discharge hose. Operate the piston rod with the handle and fill the liquid. On the last pump stroke, push the piston rod into the pump as far as it will go. Close the stopcock on the discharge hose. Unscrew the discharge hose. Carefully unscrew the pump from the drum. Rinse the drum pump with pH-neutral liquid.