Description
Syringe pump for installation in units with variable pump speed for use with syringes up to 60 ml volume.
- for installation in a unit (without housing, display, keyboard)
- with stall detection
- syringes up to 60 ml volume
- variable pump speeds: 0.0042 cm/h to 5.1005 cm/min
- variable dispensing volumes: 0.73 µl/h to 1699 ml/h
- force on syringe plunger; min./max. speed: 16 kg to 7 kg
- automatic filling of syringe
- Restart after power failure
- Programmable (pump volume, pauses, alarms, external signals etc.)
- Network-compatible via RS-232 interface
- Power supply via mains adapter: 12V DC, 800 mA
- Dimensions: 23x15x11 cm
- Weight: 1.63 kg
A PC is required to control the pump. The starter kit must also be ordered as a necessary accessory. Drivers are included in the scope of delivery to develop own programs. The unit is available for use by development departments.
Note: The unit is a built-in unit without CE marking.
- for installation in a unit (without housing, display, keyboard)
- with stall detection
- syringes up to 60 ml volume
- variable pump speeds: 0.0042 cm/h to 5.1005 cm/min
- variable dispensing volumes: 0.73 µl/h to 1699 ml/h
- force on syringe plunger; min./max. speed: 16 kg to 7 kg
- automatic filling of syringe
- Restart after power failure
- Programmable (pump volume, pauses, alarms, external signals etc.)
- Network-compatible via RS-232 interface
- Power supply via mains adapter: 12V DC, 800 mA
- Dimensions: 23x15x11 cm
- Weight: 1.63 kg
A PC is required to control the pump. The starter kit must also be ordered as a necessary accessory. Drivers are included in the scope of delivery to develop own programs. The unit is available for use by development departments.
Note: The unit is a built-in unit without CE marking.