ACTIVE CARBON, Dual Tank Backwash filter, 15LPM

The filter shall remove free chlorine to a level below 0.05 mg/l when operated within normal operating specifications. The system provides continuous filtered water through the use of a
duplex (two tank) configuration.
System backwashes are initiated by a water meter. The water meter measures the processed volume and is adjustable.
The backwash control valve is mounted on top (on the media tank) and made from non-corrosive materials.
The control valve has three operating cycles, including operation, backwash and operating flow rinse.
The tanks are made of glass fiber reinforced polypropylene, are designed for a maximum operating pressure of 8.6 bar (8.8 kg/cm2) and have been hydrostatically tested at 20.7 bar.
Each system includes acid-washed carbon media. The media must be solid and have a suitable particle size of 20-40 mesh.

Technical specifications:

Flow Range: 30-57 lpm 8-15 gpm
Optimal Media Flow Rate: 15 lpm (0,9m³/h) 4.0 gpm
Pressure Range: 1 – 8.6 bar 12 – 125 PSI
Temperature Range: 1 – 49°C 35 - 120°F
Media Vessel Construtcion: PE wrapped Polyethylene
Media Volume: (2x) 19.8 l
Regeneration Control: non-electric Use Meter
Metering Flow Range: 01.1-94.6 lpm 0.30 – 25.0 gpm
Service: Downflow
Backwash: Upflow

Automatic switching to a second media vessel, therefore operation is also possible during backwashing!

Connections:
Inlet, Outlet: 1'' Male Thread
Drain: 0,5'' Tube
Auxiliary Drain Line: 0,5'' Tube

Meter Disc Selection:
• for setting the backwash intervals
• Disc No. 4 is pre-installed
• All discs are included in delivery