Multi-Element ICP Standard Solution CR-103, 100 ml, 14 éléments dans 5 % HNO3

Catalog nr. 3HTK.1
Carl Roth

Volume: 100 ml
Quantité: 1 pièce
Prix:
Prix réduit€1.037,40
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

La solution étalon multi-éléments ICP CR-103 est un étalon d'étalonnage multi-éléments ROTI®Star avec quatorze éléments à 1000 mg/l dans 5 %. HNO3. La série d'éléments comprend Al, Ba, Be, Ca, Co, Cr, Cu, Fe, Ga, K, Mg, Na, Ni et Zn, et soutient l'étalonnage simultané pour les analytes majeurs, mineurs et traces en ICP-OES, ICP-MS, AAS et méthodes apparentées. Les spécifications du fabricant indiquent une densité d'environ 1 g/cm³, un point d'ébullition supérieur à 83 °C et le numéro UN 3264. Les utilisateurs peuvent diluer le stock de 1000 mg/l pour préparer des étalons de travail et des échantillons de contrôle sur une large plage de concentrations. La composition définie réduit la nécessité de mélanger des étalons mono-élément pour les panels métalliques courants. Les données physiques et de transport aident à une manipulation sûre au laboratoire de cette préparation multi-éléments acide dans les environnements de routine et de recherche.

Cet article fait partie de Étalons ICP, AAS & ions, dans Étalons analytiques & matériaux de référence.

Caractéristiques

  • Al (Aluminium): 1000 mg/l
  • Ba (Barium): 1000 mg/l
  • Be (Beryllium): 1000 mg/l
  • Ca (Calcium): 1000 mg/l
  • Co (Cobalt): 1000 mg/l
  • Cr (Chrom): 1000 mg/l
  • Cu (Copper): 1000 mg/l
  • Fe (Iron): 1000 mg/l
  • Ga (Gallium): 1000 mg/l
  • K (Potassium): 1000 mg/l
  • Conditionnements: 100 ml, 500 ml
  • Masse volumique: ~1 g/cm³
  • Ligne Brand: ROTI®Star
  • Composition: 14 éléments dans 5 % HNO3
  • Concentration: 1000 mg/l
  • Fiche technique: PDF
  • Fiche de données de sécurité: PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS05GHS07GHS08GHS09 Danger

Hazard Statements (H-Phrases)

H290 May be corrosive to metals
H314 Causes severe skin burns and eye damage
H317 May cause an allergic skin reaction
H350i H350i – No description available
H360D H360D – No description available
H373 May cause damage to organs through prolonged or repeated exposure
H411EU H411EU – No description available
H071 H071 – No description available

Precautionary Statements (P-Phrases)

P280 Wear protective gloves/protective clothing/eye protection/face protection.

Récemment consulté

Vous aimerez peut-être aussi

Questions about Multi-Element ICP Standard Solution CR-103, 100 ml, 14 éléments dans 5 % HNO3

What is this article?

Multi-Element ICP Standard Solution CR-103, 100 ml, 14 éléments dans 5 % HNO3 is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Étalons ICP, AAS & ions, inside Étalons analytiques & matériaux de référence, in Produits chimiques.

An ICP, AAS or ion standard is a solution of a stated element or ion at a stated concentration, with an uncertainty. It is the calibration point of a spectrometer or an electrode. The matrix, often dilute acid, has to match the method. A standard past its expiry is not that concentration.

A reference material is the article against which another result is compared. Its value is stated, and the uncertainty of that value is part of the product. An ICP or ion standard is a solution of known concentration. A volumetric standard is for titration. A chromatography standard is the peak you match. The grade names, including pharmacopoeia and ASTM, say which impurities were limited. Identity is checked on PubChem. Names follow IUPAC. Medicinal grades follow the European Pharmacopoeia and USP.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?