Description
BOLA Laboratory Screw Joint HT, GL 18, for hose outer diameter 10,0 mm is a laboratory tubing fitting with wrench size SW 22 and a black screw cap made of PPS-glass fibre. Inner components consist of a PPS clamping ring together with a sealing wedge and sealing plate manufactured from PTFE. For hose outer diameters smaller than 3 mm an additional FKM O-ring is fitted that does not contact the flow medium. Only PTFE touches the medium, providing good chemical resistance for laboratory fluid connections. The fitting is dimensioned for 10,0 mm hose outer diameter and GL 18 thread, allowing secure screw-joint assembly on matching laboratory equipment and tubing. This HT series product from manufacturer Bohlender comes as one piece with a net weight of 0,016 kg. PTFE-wetted sealing parts isolate the process stream from the PPS cap and clamp ring, supporting chemically resistant laboratory installations where leak-tight GL 18 joints and convenient SW 22 tightening are needed. The construction keeps medium contact limited to PTFE for dependable chemical compatibility in routine lab work.
This article is part of Screw caps & closures, in Stoppers, caps & closures.
Key features
- Pack size: 1 pc
- Thread: GL 18
- Hose outer diameter: 10,0 mm
- Wrench size: SW 22
- Cap material: PPS-glass fibre, black
- Sealing components: PTFE (medium contact only)
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about BOLA HT Laboratory Screw Joints, GL 18 Ø 10,0 mm SW 22 Glass-fibre reinforced PP
What is this article?
BOLA HT Laboratory Screw Joints, GL 18 Ø 10,0 mm SW 22 Glass-fibre reinforced PP is the article on this page. Luminix Health distributes Bohlender for laboratory use. It sits in Screw caps & closures, inside Stoppers, caps & closures, in Labware.
A screw cap has a thread and a liner. The thread has to match the bottle. The liner has to survive the liquid: a pulp liner fails in a solvent that a PTFE-faced liner ignores. The colour of the cap is not the specification.
A closure is the part that decides whether a bottle stays shut and whether the contents attack the seal. A ground-glass stopper matches a ground neck. A screw cap needs the right thread and a liner that survives the liquid. Rubber and silicone stoppers push into a mouth. The liner, not the colour of the cap, is the chemical choice. The vessels they close are indexed under ISO laboratory glassware.
Which category should I open next?
The category is Stoppers, caps & closures. The sub-category is Screw caps & closures. The catalogue is Labware.
Shelves beside this one are Rubber & silicone stoppers, Ground-joint glass stoppers, Lids & seals and Closures (other).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
