Description
Drying and heating oven FP115UL-120V is a forced-convection material test and drying oven engineered for short drying times and rapid heat-up to 300 °C. The temperature range extends from +10 °C above ambient temperature to +300 °C, with high temperature accuracy delivered by APT.line™ technology. Adjustable fan speed together with time-segment and real-time programming on the controller allow temperature and air-circulation conditions to be controlled precisely over extended periods. An electromechanical exhaust flap, two chrome-plated shelves and ergonomic handle design support practical laboratory use; units in this size class are stackable. Safety features include a class 2 temperature selector limiter (DIN 12880) and a class 3.1 temperature selector monitor (DIN 12880), with optical or acoustic alarm selectable on the controller. Ethernet computer interface and an internal data logger with USB readout of measured values in open format complete the package. This model from manufacturer Binder is intended for 120 V operation and suits demanding drying, heating and materials-testing workflows in laboratory environments.
This article is part of Drying ovens & climate chambers, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Temperature range: +10 °C above ambient to +300 °C
- Convection: Forced air (adjustable fan speed)
- Max. operating temperature: 300 °C
- Controller: Time-segment and real-time programming
- Interface: Ethernet and USB data logger
- Manufacturer: Binder
- UNSPSC: 41104501
- Interior dimensions: 550 × 383 × 550 mm (W × D × H)
- Exterior dimensions: 714 × 636 × 732 mm (W × D × H)
- Weight, empty: 55 kg
- Voltage: 120 V, 60 Hz
- Nominal power: 1.4 kW
- Temperature uniformity at 150 °C: ±1.4 K
- Temperature fluctuation at 150 °C: ±0.3 K
- Heating-up time to 150 °C: 19 min
- Recovery time after a 30 s door opening at 150 °C: 5 min
- Air change rate at 100 °C: 32 x/h
- Shelves, standard / maximum: 2/5
- Load per rack: 30 kg
- Permitted load: 150 kg
- Energy consumption at 100 °C: 230 Wh/h
- Energy consumption at 150 °C: 370 Wh/h
- Wall clearance, side: 100 mm
- Wall clearance, back: 160 mm
- Sound pressure level: 43 dB(A)
- Data Sheet:
Recently viewed
You may also like
Questions about Drying and heating chambers FP115UL-120V
What is this article?
Drying and heating chambers FP115UL-120V is the article on this page. Luminix Health distributes Binder for laboratory use. It sits in Drying ovens & climate chambers, inside Heating, drying & cooling, in Lab instruments.
A drying oven holds a temperature above ambient to drive off water or to condition a sample. A climate chamber also holds humidity. Uniformity across the chamber, not only the set point, decides whether two samples on different shelves saw the same conditions.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Drying ovens & climate chambers. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.