Description
Dynamic climate chamber MKT240-480V-C is an environmental simulation cabinet engineered for cyclic temperature tests from −70 °C to +180 °C. With a nominal volume of 228 l it uses APT.line™ preheating chamber technology, forced-air tempering, a stainless-steel interior and stainless-steel shelves, plus cascade compression cooling with CFC-free refrigerants R-452A and R-23 and a finned evaporator. A heated viewing window with LED interior lighting, programmable condensation protection for samples, door heating, adjustable ramp function and PUR foam thermal insulation support stable operation. Four potential-free switching contacts can be activated via the MCS controller; the unit further offers time-segment programming, LCD colour monitor display, Ethernet computer interface, integrated chart recorder, real-time clock and a Pt 100 temperature sensor. Safety is addressed by a class 2 temperature selectable limiter (DIN 12880) with optical alarm and a fault diagnosis system with optical and acoustic alarm. Mobility is provided by four castors (two lockable) and a left-side 50 mm access port with silicone plug. BINDER Multi Management Software APT-COM™ Basic Edition and a BINDER test confirmation are included. This model from manufacturer Binder delivers high precision for natural-simulation cyclic temperature work. Pack size 1 pc.
This article is part of Drying ovens & climate chambers, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Nominal volume: 228 l
- Temperature range: −70 °C to +180 °C
- Temperature sensor: Pt 100
- Controller: MCS with time-segment programming, LCD colour monitor
- Manufacturer: Binder
- Net weight: 426 kg
- UNSPSC: 41104900
- Interior dimensions: 735 × 443 × 700 mm (W × D × H)
- Exterior dimensions: 1115 × 925 × 1935 mm (W × D × H)
- Weight, empty: 380 kg
- Voltage: 480 V, 60 Hz
- Nominal power: 6.5 kW
- Temperature uniformity, depending on setpoint: ±0.1...±1 K
- Temperature fluctuation, depending on setpoint: ±0.1...±0.4 K
- Average heating-up rate between -40 °C and 180 °C: 5 K/min
- Cooling-down time from 180 °C to -70 °C: 95 min
- Average cooling-down time between 180 °C and -40 °C: 4.2 K/min
- Shelves, standard / maximum: 1/6
- Load per rack: 30 kg
- Permitted load: 70 kg
- Wall clearance, side: 200 mm
- Wall clearance, back: 300 mm
- Sound pressure level: 67 dB(A)
- Technical Information Sheet:
- Data Sheet:
Recently viewed
You may also like
Questions about Dynamic climate chambers MKT240-480V-C
What is this article?
Dynamic climate chambers MKT240-480V-C is the article on this page. Luminix Health distributes Binder for laboratory use. It sits in Drying ovens & climate chambers, inside Heating, drying & cooling, in Lab instruments.
A drying oven holds a temperature above ambient to drive off water or to condition a sample. A climate chamber also holds humidity. Uniformity across the chamber, not only the set point, decides whether two samples on different shelves saw the same conditions.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Drying ovens & climate chambers. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.