Description
Dynamic climate chamber MKT720-480V-C is a large environmental simulation cabinet for cyclic temperature testing across −70 °C to +180 °C. The 734 l nominal volume features APT.line™ preheating chamber technology, forced-air temperature control, a stainless-steel interior and stainless-steel shelves, together with cascade compression cooling using CFC-free refrigerants R-452A and R-23. A heated viewing window with LED interior lighting, programmable condensation protection for samples, door heating and an adjustable ramp function aid reproducible conditions. The chamber provides four potential-free switching contacts, an intuitive touchscreen controller with time-segment and real-time programming, an internal data logger with open-format USB readout, Ethernet interface, integrated chart recorder and real-time clock. Two 80 mm access ports with silicone plugs (left and right), a class 2 temperature selectable limiter (DIN 12880) with optical alarm, a fault diagnosis system with optical and acoustic alarm, and four castors (two lockable) complete the equipment. BINDER Multi Management Software APT-COM™ Basic Edition supports multi-unit management. This unit from manufacturer Binder meets demanding precision and performance requirements for natural-simulation cyclic temperature tests. Power consumption is 13000 W; pack size 1 pc.
This article is part of Drying ovens & climate chambers, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Nominal volume: 734 l
- Temperature range: −70 °C to +180 °C
- Power consumption: 13000 W
- Controller: Intuitive touchscreen with time-segment and real-time programming
- Manufacturer: Binder
- Net weight: 828 kg
- UNSPSC: 41104900
- Interior dimensions: 1200 × 600 × 1020 mm (W × D × H)
- Exterior dimensions: 1580 × 1140 × 2005 mm (W × D × H)
- Weight, empty: 610 kg
- Voltage: 480 V, 60 Hz
- Nominal power: 13 kW
- Temperature uniformity, depending on setpoint: ±0.1...±2 K
- Temperature fluctuation, depending on setpoint: ±0.1...±0.5 K
- Average heating-up rate between -40 °C and 180 °C: 4.5 K/min
- Cooling-down time from 180 °C to -70 °C: 120 min
- Average cooling-down time between 180 °C and -40 °C: 4 K/min
- Shelves, standard / maximum: 1/11
- Load per rack: 40 kg
- Permitted load: 160 kg
- Wall clearance, side: 200 mm
- Wall clearance, back: 300 mm
- Sound pressure level: 67 dB(A)
- Technical Information Sheet:
- Data Sheet:
Recently viewed
You may also like
Questions about Dynamic climate chambers MKT720-480V-C
What is this article?
Dynamic climate chambers MKT720-480V-C is the article on this page. Luminix Health distributes Binder for laboratory use. It sits in Drying ovens & climate chambers, inside Heating, drying & cooling, in Lab instruments.
A drying oven holds a temperature above ambient to drive off water or to condition a sample. A climate chamber also holds humidity. Uniformity across the chamber, not only the set point, decides whether two samples on different shelves saw the same conditions.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Drying ovens & climate chambers. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.