Description
Thermoblock/Incubator - BRT Test is a digital metal block thermostat for controlled laboratory incubation and heating. It combines 10 grooves measuring 75 × 9 × 10 mm (L × W × D) with 20 circular bores of 10,9 mm diameter, so different sample formats can be processed in one run. The unit is rated at 230 W and leaves the factory with a temperature setting of 64,5 °C, matching typical BRT-test requirements. Digital operation supports stable thermal conditions for routine assays and standardised incubation workflows. Offered as a single piece from manufacturer Aerne Analytic, this compact benchtop instrument fits metal-block and heating-block thermostat applications in analytical and diagnostic laboratories. The dual layout of elongated grooves and round bores gives flexibility for tubes and similar vessels used in temperature-dependent protocols. Clear capacity data and a defined factory set-point help laboratories integrate the thermoblock quickly into existing BRT and general incubation procedures without additional configuration steps.
This article is part of Hot plates & heating blocks, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Number of grooves: 10
- Groove dimensions: 75 × 9 × 10 mm
- Number of bores: 20
- Bore diameter: 10,9 mm
- Power rating: 230 W
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Incubator - BRT-Test
What is this article?
Incubator - BRT-Test is the article on this page. Luminix Health distributes Aerne Analytic for laboratory use. It sits in Hot plates & heating blocks, inside Heating, drying & cooling, in Lab instruments.
A hot plate heats a flat-bottom vessel from below, often with stirring. A heating block holds tubes in machined holes so each tube sees the same temperature. The block's hole diameter has to match the tube, or the heat never arrives.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Hot plates & heating blocks. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Drying ovens & climate chambers, Water & oil baths, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.