Description
LAUDA PRO P 2 EC
Heating circulator 200-230 V; 50/60 Hz
Features:
Thermostatic circulator with latest microprocessor technology. Installed cooling coil
Large 5,7'' Multi-Touch-Color display
Operation with multi touch display
Command console can be detached and used as remote control
User administration for up to 20 user
Data in- and export via USB
Timer und count-down-function
EasyUse system for simple operation of the whole unit
Low-level and adjustable over-temperature protection with acoustic alarm for use with flammable and non-flammable liquids
SelfCheck Assistant for system diagnosis
USB and Ethernet interface equipped as standard
Retrofittable for upgrading with interface (RS 232/485, Profibus; EtherCAT; analogue or contact modules)
Fully electronic continuous controller with PID action for internal & external control
PowerAdapt system for the use of the maximum possible amount of heat permitted by the power supply system
Programmer with up to 100 programs, up to 50 segments each
Tower design with small footprint
LAUDA Varioflex pump (pressure/suction) with 8 selectable levels, connections rear
Low filling volume enables rapid changes in temperature
Bath vessel made of stainless steel (insulated, with overflow and drain tap)
Technical Features (according to DIN 12876):
Working temperature range: 80 ... 250 °C
Working temperature range with external cooling: 20 ... 250 °C
Operating temperature range: -30 ... 250 °C
Ambient temperature range: 5 ... 40 °C
Temperature stability: 0.05 ± K
Heater power max.: 2.5 kW
Power consumption max.: 2.7 kW
Current max.: 12 A
Pump Pressure max.: 0,7 bar
Pump suction max.: 0,4 bar
Pump flow rate max. (pressure): 22 L/min
Pump Flow rate max. (suction): 20 L/min
In / Outlet connection thread (outside): M16 x 1
In / Outlet Ø olives: 13 mm
Filling volume min.: 2.4 L
Filling volume max.: 4.4 L
Overall dimensions (WxDxH): 250 x 365 x 425 mm
Weight: 17 kg
Power supply: 200-230 V; 50/60 Hz
Power plug: Power cord with angled plug (CEE7/7)
Standard Accessory:
2 screw caps, 2 closing plugs
2 nipples 13 mm for pump connectors
2 nipples 10 mm with screw cap G3/8 for cooling water
Heating circulator 200-230 V; 50/60 Hz
Features:
Thermostatic circulator with latest microprocessor technology. Installed cooling coil
Large 5,7'' Multi-Touch-Color display
Operation with multi touch display
Command console can be detached and used as remote control
User administration for up to 20 user
Data in- and export via USB
Timer und count-down-function
EasyUse system for simple operation of the whole unit
Low-level and adjustable over-temperature protection with acoustic alarm for use with flammable and non-flammable liquids
SelfCheck Assistant for system diagnosis
USB and Ethernet interface equipped as standard
Retrofittable for upgrading with interface (RS 232/485, Profibus; EtherCAT; analogue or contact modules)
Fully electronic continuous controller with PID action for internal & external control
PowerAdapt system for the use of the maximum possible amount of heat permitted by the power supply system
Programmer with up to 100 programs, up to 50 segments each
Tower design with small footprint
LAUDA Varioflex pump (pressure/suction) with 8 selectable levels, connections rear
Low filling volume enables rapid changes in temperature
Bath vessel made of stainless steel (insulated, with overflow and drain tap)
Technical Features (according to DIN 12876):
Working temperature range: 80 ... 250 °C
Working temperature range with external cooling: 20 ... 250 °C
Operating temperature range: -30 ... 250 °C
Ambient temperature range: 5 ... 40 °C
Temperature stability: 0.05 ± K
Heater power max.: 2.5 kW
Power consumption max.: 2.7 kW
Current max.: 12 A
Pump Pressure max.: 0,7 bar
Pump suction max.: 0,4 bar
Pump flow rate max. (pressure): 22 L/min
Pump Flow rate max. (suction): 20 L/min
In / Outlet connection thread (outside): M16 x 1
In / Outlet Ø olives: 13 mm
Filling volume min.: 2.4 L
Filling volume max.: 4.4 L
Overall dimensions (WxDxH): 250 x 365 x 425 mm
Weight: 17 kg
Power supply: 200-230 V; 50/60 Hz
Power plug: Power cord with angled plug (CEE7/7)
Standard Accessory:
2 screw caps, 2 closing plugs
2 nipples 13 mm for pump connectors
2 nipples 10 mm with screw cap G3/8 for cooling water