1,4-Dioxane, ROTIPURAN®, min. 99.5 %, p.a., ACS, ISO, 1 l, verre

Catalog nr. 4626.4
Carl Roth

Volume: 100 ml
Quantité: 1 pièce
Prix:
Prix réduit€23,15
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

1,4-Dioxane est un solvant organique proposé en qualité ROTIPURAN® avec une teneur minimale de 99.5 %, p.a., ACS, ISO pour un usage analytique en laboratoire. Il porte le numéro CAS 123-91-1 et la formule empirique C₄H₈O₂, avec une masse molaire de 88.11 g/mol et une densité de 1.03 g/cm³. Le point d'éclair est de 11 °C et l'intervalle d'ébullition est de 100.8 à 101.5 °C, des données qui soutiennent la planification d'une manipulation sûre et la conception de montages de distillation ou de réaction. Disponible du fabricant Carl ROTH sous la désignation ROTIPURAN®, il fournit un milieu d'éther cyclique défini pour la dissolution, l'extraction et les étapes liées à la synthèse dans des environnements de laboratoire contrôlés. Les applications typiques comprennent l'utilisation comme solvant aprotique polaire dans les travaux de soutien à la synthèse organique, la préparation d'échantillons et les procédures analytiques qui exigent une qualité 1,4-dioxane de haute pureté. La combinaison de la pureté indiquée, des constantes physiques et du conditionnement en verre convient aux paillasses de chimie analytique de recherche et de routine qui spécifient des solvants p.a.

Cet article fait partie de Solvants de qualité analytique (p.a.), dans Solvants.

Caractéristiques

  • Dosage (GC): ≥99.5 %
  • Couleur (Hazen): ≤10
  • Eau: ≤0.05 %
  • Résidu d'évaporation: ≤0.005 %
  • Acidité: ≤0.0016 meq/g
  • Densité (d 20 °C/4 °C): 1,032-1,034
  • Point de fusion: ≥11 °C
  • Aluminium (Al): ≤0.00005 %
  • Barium (Ba): ≤0.00001 %
  • Lead (Pb): ≤0.00001 %
  • Numéro CAS: 123-91-1
  • Pack size: 1 l
  • Pack size: 2.5 l
  • Pack size: 500 ml
  • Pack size: 100 ml
  • Pack size: 5 l
  • Pack size: 25 l
  • N° CE: 204-661-8
  • Pureté: min. 99.5 %
  • Formule brute: C₄H₈O₂
  • Masse molaire: 88.11 g/mol
  • Fiche technique: PDF
  • Fiche de données de sécurité: PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS02GHS07GHS08 Danger

Hazard Statements (H-Phrases)

H225 Highly flammable liquid and vapour
H319 Causes serious eye irritation
H335 May cause respiratory irritation
H350EU H350EU – No description available
H019EU H019EU – No description available
H066 Repeated exposure may cause skin dryness or cracking

Precautionary Statements (P-Phrases)

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261 P261 – No description available
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313 IF exposed or concerned: Get medical advice/attention.

Récemment consulté

Vous aimerez peut-être aussi

Questions about 1,4-Dioxane, ROTIPURAN®, min. 99.5 %, p.a., ACS, ISO, 1 l, verre

What is this article?

1,4-Dioxane, ROTIPURAN®, min. 99.5 %, p.a., ACS, ISO, 1 l, verre is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Solvants de qualité analytique (p.a.), inside Solvants, in Produits chimiques.

An analytical-grade solvent, often marked p.a., has impurity limits tight enough for classical analysis and for preparing reagents. It is not automatically low enough in UV absorbance for HPLC, and it is not dry enough for a water-sensitive reaction. The grade is the purchase.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?