1,4-Dioxane, ROTISOLV® min. 99.8 % HPLC, non stabilisé, 1 l, verre

Catalog nr. X949.1
Carl Roth

Volume: 1 liter
Quantité: 1 pièce
Prix:
Prix réduit€100,95
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

1,4-Dioxane ROTISOLV®, min. 99.8 %. HPLC, non stabilisé, est un solvant de haute pureté pour la chromatographie liquide, Identifié par le numéro CAS 123-91-1, la formule empirique C₄H₈O₂, la masse molaire 88.11 g/mol et le numéro EG 204-661-8, il est spécifié pour une utilisation HPLC sans stabilisant. Les caractéristiques physiques comprennent une densité de 1.03 g/cm³, un point d'éclair de 11 °C et une plage d'ébullition de 100.8 à 101.5 °C ; le numéro UN est 1165. Cette qualité ROTISOLV® du fabricant Carl ROTH prend en charge les applications chromatographiques et d'analyse environnementale qui exigent une teneur minimale de 99.8 % et une composition non stabilisée. Le flacon en verre d'un litre convient à la manipulation courante des solvants sur les paillasses HPLC et dans les zones de préparation. Les laboratoires l'emploient dans les flux de travail de chromatographie liquide pour les composants de la phase mobile, la préparation des échantillons ou le développement de méthodes lorsque une pureté définie et l'absence de stabilisant sont requises pour une performance chromatographique constante.

Cet article fait partie de Solvants de qualité analytique (p.a.), dans Solvants.

Caractéristiques

  • Dosage (GC): ≥99.8 %
  • Couleur (Hazen): ≤10
  • Eau (KF): ≤0.02 %
  • Acide libre (sous forme de CH3COOH): ≤0.002 %
  • Matière non volatile: ≤0.0005 %
  • 300 nm: ≥98 %
  • 280 nm: ≥90 %
  • 240 nm: ≥40 %
  • 220 nm: ≥20 %
  • Numéro CAS: 123-91-1
  • Pack size: 1 l
  • Pack size: 2.5 l
  • N° CE: 204-661-8
  • Pureté: min. 99.8 % HPLC, non stabilisé
  • Formule brute: C₄H₈O₂
  • Masse molaire: 88.11 g/mol
  • Fiche technique: PDF
  • Fiche de données de sécurité: PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS02GHS07GHS08 Danger

Hazard Statements (H-Phrases)

H225 Highly flammable liquid and vapour
H319 Causes serious eye irritation
H335 May cause respiratory irritation
H350EU H350EU – No description available
H019EU H019EU – No description available
H066 Repeated exposure may cause skin dryness or cracking

Precautionary Statements (P-Phrases)

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261 P261 – No description available
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313 IF exposed or concerned: Get medical advice/attention.

Récemment consulté

Vous aimerez peut-être aussi

Questions about 1,4-Dioxane, ROTISOLV® min. 99.8 % HPLC, non stabilisé, 1 l, verre

What is this article?

1,4-Dioxane, ROTISOLV® min. 99.8 % HPLC, non stabilisé, 1 l, verre is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Solvants de qualité analytique (p.a.), inside Solvants, in Produits chimiques.

An analytical-grade solvent, often marked p.a., has impurity limits tight enough for classical analysis and for preparing reagents. It is not automatically low enough in UV absorbance for HPLC, and it is not dry enough for a water-sensitive reaction. The grade is the purchase.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?