Acetonitrile ROTISOLV®, min. 99.9 %, pour la synthèse d'ADN, max. 10 ppm H2O

Catalog nr. 8824.2
Carl Roth

Volume: 2.5 liter
Quantité: 1 pièce
Prix:
Prix réduit€166,65
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

Acetonitrile ROTISOLV® est une qualité de solvant de haute pureté avec un dosage minimal de 99.9 %, spécifiée pour la synthèse d'ADN et contrôlée à un maximum de 10 ppm H₂O. Il est identifié par le numéro CAS 75-05-8, le numéro EG 200-835-2 et la formule empirique C₂H₃N, avec une masse molaire de 41.05 g/mol. Les principales données physiques comprennent une densité de 0.79 g/cm³, un point d'éclair de 2 °C et un point d'ébullition de 81.65 °C, ce qui favorise une conception de procédé sûre et la manipulation du solvant. Fourni en conditionnement de 2.5 l, cette qualité est destinée aux flux de travail de synthèse d'oligonucléotides et d'ADN où une faible teneur en eau et une pureté chimique élevée sont essentielles pour l'efficacité de couplage et l'intégrité du produit. La spécification ROTISOLV® du fabricant Carl ROTH répond à des applications organiques et biomoléculaires exigeantes au-delà de l'usage général de laboratoire. Les laboratoires engagés dans la chimie de l'ADN en phase solide, les réactions organiques anhydres et la synthèse associée peuvent s'appuyer sur la limite d'eau définie et le dosage. L'unité de volume plus importante convient aux installations de synthèse continue ou à haut débit qui nécessitent un approvisionnement constant en acetonitrile.

Cet article fait partie de Solvants de qualité analytique (p.a.), dans Solvants.

Caractéristiques

  • Dosage (GC): ≥99.9 %
  • Eau (KF): ≤0.001 %
  • Matière non volatile: ≤0.0001 %
  • Numéro CAS: 75-05-8
  • Conditionnement: 2.5 l
  • N° CE: 200-835-2
  • Pureté: min. 99.9 %, max. 10 ppm H₂O
  • Formule brute: C₂H₃N
  • Masse molaire: 41.05 g/mol
  • Fiche technique: PDF
  • Fiche de données de sécurité: PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS02GHS07 Danger

Hazard Statements (H-Phrases)

H225 Highly flammable liquid and vapour
H302+ H302+ – No description available
H312+ H312+ – No description available
H332 Harmful if inhaled
H319 Causes serious eye irritation

Precautionary Statements (P-Phrases)

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403+P235 P403+P235 – No description available

Récemment consulté

Vous aimerez peut-être aussi

Questions about Acetonitrile ROTISOLV®, min. 99.9 %, pour la synthèse d'ADN, max. 10 ppm H2O

What is this article?

Acetonitrile ROTISOLV®, min. 99.9 %, pour la synthèse d'ADN, max. 10 ppm H2O is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Solvants de qualité analytique (p.a.), inside Solvants, in Produits chimiques.

An analytical-grade solvent, often marked p.a., has impurity limits tight enough for classical analysis and for preparing reagents. It is not automatically low enough in UV absorbance for HPLC, and it is not dry enough for a water-sensitive reaction. The grade is the purchase.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?