Dichloromethane, PEPTIPURE®, min. 99.9 %, pour la synthèse peptidique, 2.5 l, verre

Catalog nr. P089.1
Carl Roth

Volume: 2.5 liter
Quantité: 1 pièce
Prix:
Prix réduit€94,10
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

Dichloromethane, PEPTIPURE® est un solvant de haute pureté avec un dosage minimal de 99.9 %, destiné à la synthèse peptidique, y compris le lavage, la déprotection et les étapes de procédé associées. Stabilisé avec amylene, il offre la formule brute CH₂Cl₂, le numéro CAS 75-09-2, le numéro EG 200-838-9 et une masse molaire de 84.93 g/mol. Les propriétés physiques rapportées comprennent une densité de 1.33 g/cm³ et un point d'ébullition de 40 °C, caractéristiques du dichloromethane utilisé en chimie organique et peptidique. La qualité PEPTIPURE® du fabricant Carl ROTH soutient les exigences exigeantes en réactifs de synthèse peptidique lorsque la qualité du solvant est critique pour les cycles de couplage et la manipulation des intermédiaires. Fourni dans un conditionnement en verre de 2.5 l, le solvant convient à la synthèse de laboratoire à échelle moyenne et à l'usage de procédé de routine. Le numéro UN 1593 identifie le matériau pour une planification conforme du transport et du stockage. Cette qualité de dichloromethane est positionnée pour les laboratoires réalisant la synthèse peptidique et les opérations associées de lavage organique ou de déprotection qui spécifient du dichloromethane de qualité PEPTIPURE®.

Cet article fait partie de Solvants de qualité analytique (p.a.), dans Solvants.

Caractéristiques

  • Dosage (GC): ≥99.9 %
  • Eau (KF): ≤0.005 %
  • Matière non volatile: ≤0.0005 %
  • Amines libres: ≤0.001%
  • Numéro CAS: 75-09-2
  • Conditionnement: 2.5 l verre
  • N° CE: 200-838-9
  • Pureté: min. 99.9 %, PEPTIPURE®
  • Formule brute: CH₂Cl₂
  • Masse molaire: 84.93 g/mol
  • Fiche technique: PDF
  • Fiche de données de sécurité: PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS07GHS08 Attention

Hazard Statements (H-Phrases)

H315 Causes skin irritation
H319 Causes serious eye irritation
H336 May cause drowsiness or dizziness
H351 Suspected of causing cancer
H420 H420 – No description available

Precautionary Statements (P-Phrases)

P261 P261 – No description available
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313 IF exposed or concerned: Get medical advice/attention.

Récemment consulté

Vous aimerez peut-être aussi

Questions about Dichloromethane, PEPTIPURE®, min. 99.9 %, pour la synthèse peptidique, 2.5 l, verre

What is this article?

Dichloromethane, PEPTIPURE®, min. 99.9 %, pour la synthèse peptidique, 2.5 l, verre is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Solvants de qualité analytique (p.a.), inside Solvants, in Produits chimiques.

An analytical-grade solvent, often marked p.a., has impurity limits tight enough for classical analysis and for preparing reagents. It is not automatically low enough in UV absorbance for HPLC, and it is not dry enough for a water-sensitive reaction. The grade is the purchase.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?