Description
Stainless steel frame with identification number and factory certificate 2.1 EN 10204 is a laboratory sieve frame intended for analytical particle-size separation. It features a diameter of 300 mm and an internal height of 55 mm, providing a stable housing for perforated plate media in test sieve stacks. The covering comprises perforated plates made from iron (Fe) with square perforation according to ISO 565 and ISO 3310-2, and the mesh size is 11,2 mm for screening coarser sample fractions. Manufactured from stainless steel, the frame offers mechanical strength and resistance to wear under typical laboratory handling. Each unit is supplied as one piece and includes an identification number plus a factory certificate 2.1 in accordance with EN 10204, which supports batch traceability and quality records. This sieve frame from manufacturer Linker is suitable for materials testing, quality control and sample preparation workflows where documented stainless steel frames with defined square apertures are required. The combination of standardised perforation geometry, clear identification and certified documentation supports reproducible sieving conditions in routine laboratory use.
This article is part of Test sieves (wire mesh), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Material: Stainless steel
- Diameter: 300 mm
- Internal height: 55 mm
- Mesh size: 11,2 mm
- Perforation: Square hole, ISO 565/ISO 3310-2
Récemment consulté
Vous aimerez peut-être aussi
Questions about Cadre en acier inoxydable, avec numéro d'identification et certificat de fabrication 2.1 EN 10 204
What is this article?
Cadre en acier inoxydable, avec numéro d'identification et certificat de fabrication 2.1 EN 10 204 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Tamis d'essai (toile métallique), inside Tamis d'essai & broyeurs, in Instruments de laboratoire.
A wire-mesh test sieve sorts particles through a woven opening of a stated nominal size. The frame diameter and the mesh are the specification. A sieve without a certificate is a screen, not a measurement.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Tamis d'essai & broyeurs. The sub-category is Tamis d'essai (toile métallique). The catalogue is Instruments de laboratoire.
Shelves beside this one are Tamis d'essai (tôle perforée), Broyeurs, moulins & homogénéisateurs, Tamiseurs vibrants and Accessoires de tamis (couvercles, fonds, anneaux).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.