Lead(II) oxide, min. 99 %, extra pur, 250 g, plastique

Catalog nr. 4456.1
Carl Roth

Volume: 250 g
Quantité: 1 pièce
Prix:
Prix réduit€34,95
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

Lead(II) oxide est un oxyde inorganique extra-pur d'une pureté minimale de 99 %, numéro CAS 1317-36-8 et formule empirique PbO. Les principales données physico-chimiques comprennent une masse molaire de 223.2 g/mol, une densité de 9.53 g/cm³ et un point d'ébullition supérieur à 600 °C, ce qui rend le solide adapté à la synthèse contrôlée en laboratoire et au travail lié aux matériaux. Le produit est fourni en conditionnement plastique de 250 g pour une pesée pratique et un usage répété en laboratoire. EG nr. 215-267-0 soutient une identification claire de la substance dans la documentation d'inventaire et de sécurité. Disponible du fabricant Carl ROTH, cette qualité extra-pure est destinée aux applications qui exigent une source définie de Lead(II) oxide plutôt qu'un matériau technique en vrac. Les contextes typiques de laboratoire comprennent la préparation d'autres composés du plomb, des formulations de recherche pour céramique ou verre, et des expériences analytiques ou d'enseignement dans lesquelles une haute pureté et une composition constante sont importantes. Les valeurs de densité et de masse molaire aident aux calculs stœchiométriques et aux enregistrements de lots. Le récipient en plastique soutient un stockage et une manipulation ordonnés dans des environnements de laboratoire convenablement contrôlés, selon les procédures de sécurité applicables aux réactifs contenant du plomb.

Cet article fait partie de Métaux, éléments & oxydes, dans Produits chimiques inorganiques.

Caractéristiques

  • Dosage (base métaux): 99-100.5 %
  • Chlorure (Cl): ≤0.05 %
  • Copper (Cu): ≤0.005 %
  • Fer (Fe): ≤0.01 %
  • Perte au feu: ≤0.2 %
  • Insoluble dans CH3COOH: ≤0.2 %
  • Numéro CAS: 1317-36-8
  • Conditionnement: 250 g plastique
  • N° CE: 215-267-0
  • Pureté: min. 99 %, extra pur
  • Formule brute: PbO
  • Masse molaire: 223.2 g/mol
  • Fiche technique: PDF
  • Fiche de données de sécurité: PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS07GHS08GHS09 Danger

Hazard Statements (H-Phrases)

H302+ H302+ – No description available
H332 Harmful if inhaled
H351 Suspected of causing cancer
H360Df H360Df – No description available
H362 H362 – No description available
H372 Causes damage to organs through prolonged or repeated exposure
H410 Very toxic to aquatic life with long lasting effects

Precautionary Statements (P-Phrases)

P202 P202 – No description available
P263 P263 – No description available
P273 P273 – No description available
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P312 P301+P312 – No description available
P308+P313 IF exposed or concerned: Get medical advice/attention.

Récemment consulté

Vous aimerez peut-être aussi

Questions about Lead(II) oxide, min. 99 %, extra pur, 250 g, plastique

What is this article?

Lead(II) oxide, min. 99 %, extra pur, 250 g, plastique is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Métaux, éléments & oxydes, inside Produits chimiques inorganiques, in Produits chimiques.

Metals, elements and oxides are the element itself or its oxide, sold as powder, shot, foil or wire. Purity and particle size are both the specification. A 99 percent powder and a 99.999 percent shot of the same element are different articles. Many are reactive to air or to water.

An inorganic chemical is a salt, an acid or base in solid form, a metal, an oxide, or an element. The waters of hydration are part of the formula: a hydrate and an anhydrous salt are different masses for the same ion. Trace metals matter when the salt will be used in analysis. Nanomaterials add particle size to the specification. Look the substance up on PubChem. Hazard classes are on ECHA, under the CLP Regulation and REACH. Transport of the dangerous ones is explained by the UNECE.

Which category should I open next?

The category is Produits chimiques inorganiques. The sub-category is Métaux, éléments & oxydes. The catalogue is Produits chimiques.

Shelves beside this one are Sels inorganiques and Nanomatériaux & points quantiques.

What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?