Description
3DLac Plus Spray Adhesive is a spray adhesive for 3D printing supplied in a 100 ml pump spray bottle. Density (D) is 0,82 to 0,83 g/cm³, the flash point (flp) is <0 °C and the boiling point (bp) is >45 °C. The 100 ml pump spray bottle is an accessory for conventional 3D printing and belongs with adhesives for 3D printing. Laboratories and workshops running conventional 3D printing can specify this 100 ml spray when a pump spray bottle is the required pack. From manufacturer 3DLac, 3DLac Plus Spray Adhesive is offered as a 100 ml pump spray bottle with density 0,82 to 0,83 g/cm³. Flash point below 0 °C and boiling point above 45 °C are the stated thermal properties of the adhesive as supplied. Users choosing adhesives for 3D printing may select the 100 ml pump spray bottle for conventional 3D printing accessory use. 3DLac Plus Spray Adhesive is thus the 100 ml pump spray adhesive defined by density 0,82 to 0,83 g/cm³, flash point <0 °C and boiling point >45 °C.
This article is part of 3D printers, accessories & spare parts, in 3D printing & bioprinting.
Key features
- Pack size: 100 ml pump spray bottle
- Density: 0,82 to 0,83 g/cm³
- Flash point: <0 °C
- Boiling point: >45 °C
- UN nr.: 1993
- Safety Data Sheet:
Compliance & Safety Information
DangerHazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Browse related categories
Category
Sub-category
3D printers, accessories & spare parts
Catalogue
Brand
Questions about 3DLac Plus Spray Adhesive, 100 ml, pump spray bottle
What is this article?
3DLac Plus Spray Adhesive, 100 ml, pump spray bottle is the article on this page. Luminix Health distributes 3DLac for laboratory use. It sits in 3D printers, accessories & spare parts, inside 3D printing & bioprinting, in Lab instruments.
These are the printers themselves and the nozzles, beds and build plates that wear out. Nozzle diameter decides detail against speed. A spare nozzle for a different extruder thread does not fit. The printer's build volume is the largest object it can make.
A laboratory 3D printer builds a solid from a filament or a resin, layer by layer, when a shape is needed and a catalogue part does not exist. Bioprinting uses a bioink that contains, or will contain, living cells. The material decides the chemistry of the object and whether a cell will tolerate it. A filament that is only described as plastic is not a specification. Cell work around bioinks is discussed in the WHO biosafety topic and the papers are on PubMed.
Which category should I open next?
The category is 3D printing & bioprinting. The sub-category is 3D printers, accessories & spare parts. The catalogue is Lab instruments.
Shelves beside this one are 3D printer filaments & resins and Bioinks & bioprinting materials.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.