Description
Dryer for laboratory glassware, model IM-DRY 200 is a laboratory drying unit configured for simultaneous drying of washed glassware across a practical range of tube diameters. It provides 56 drying tubes in total: 24 tubes of 16 mm diameter, 16 tubes of 14 mm diameter and 12 tubes of 12 mm diameter. The drying attachment is made of acid-resistant steel, overheating protection is built in, and the integrated filter can be replaced easily when service is required.
This article is part of Drying ovens & climate chambers, in Heating, drying & cooling.
The blower can deliver warm air or ambient room air according to the drying task. A timer covers 15 to 180 minutes as well as continuous operation for flexible workflow planning. External dimensions are approximately 310 × 920 × 320 mm (W × H × D). Electrical data are 230 V, 50/60 Hz with a rated power of 1000 W; net weight is 17 kg. This unit from manufacturer Irmeco is intended for laboratory glassware drying stations that need mixed tube sizes, selectable air temperature mode and timed or continuous runs in routine wash-up and preparation areas.
Key features
- Pack size: 1 pc
- Model: IM-DRY 200
- Number of drying tubes: 56
- Tube diameters: 24 × 16 mm, 16 × 14 mm, 12 × 12 mm
- Blower: warm or ambient air
- Timer: 15–180 min or continuous operation
- Technical Information Sheet:
Recently viewed
You may also like
Questions about AirDryer for Glassware, model IM-DRY 200
What is this article?
AirDryer for Glassware, model IM-DRY 200 is the article on this page. Luminix Health distributes Irmeco for laboratory use. It sits in Drying ovens & climate chambers, inside Heating, drying & cooling, in Lab instruments.
A drying oven holds a temperature above ambient to drive off water or to condition a sample. A climate chamber also holds humidity. Uniformity across the chamber, not only the set point, decides whether two samples on different shelves saw the same conditions.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Drying ovens & climate chambers. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.