CO2-incubator BB 15, Capacity 151 l, 1 unit(s)

Catalog nr. ETT4.1
THERMO SCIENTIFIC

Volume: 1 pc(s)
Value Packs: 1 piece
Price:
Sale price€7.360,00
Ask quote for bulk order

Description

CO2-incubator BB 15, Capacity 151 l

With air jacket heating for constant temperature as well as a second control circuit that assumes control of the set temperature in the case of a fault. The chamber floor is used as water reservoir (an electric suction pump is included in the scope of delivery for changing the water). The large water surface and direct heat transfer from the heated base achieve a faster humidity recovery time.

  • Operating temperature range from 3 °C above room temperature to 55 °C (in 0.1-°C-increments) and CO2-concentrations up to 20% (in 0.1%-increments)
  • Digital display for °C and CO2 content
  • Tube penetration 42 mm in the rear wall allows operation of additional devices
  • Stainless steel interior
  • Constant moisture at 37 °C approx. 95% RH
  • Additional inside door made of glass, heated outside door
  • To supply the incubator with CO2, a separate gas cylinder or a central compressed-gas tank is required
  • Conditioned water (demineralised/distilled and autoclaved or fully desalinated/distilled and autoclaved) is required for humidification
Delivery incl. three perforated sheet inserts (W 423 x D 455 mm), hose set (ID 4 mm, OD 10 mm, approx. L 3 m), CO2 filter and electric immersion pump. Please note: additional transport costs apply for delivery to the place of use. We will be happy to inform you of these on request.
Technical Information
Type BB 15 
Vol. 151 l
Operating temperature from +3 °C above room temperature to +55 °C 
Inner width 470 mm
Inner depth 530 mm
Inner height 607 mm
Outer width 637 mm
Outer depth 766 mm
Outer height 867 mm
Required input pressure 0.8-1.0 bar, 99.5 % by volume medical CO2 quality 
Intake-air filtration CO2 filter, PTFE filter 0.3 μm, PP filter housing 
Max. removable shelves 10 
Temporal temp. variance ±0,1 K
Spatial temp. deviation ±0,5 K
CO2 constancy ±0,3 %
Weight 70 kg
Mains connection 230 V, 50/60 Hz 

Recently viewed

You may also like

Questions about CO2-incubator BB 15, Capacity 151 l, 1 unit(s)

What is this article?

CO2-incubator BB 15, Capacity 151 l, 1 unit(s) is the article on this page. Luminix Health distributes THERMO SCIENTIFIC for laboratory use. It sits in Incubators, inside Heating, drying & cooling, in Lab instruments.

An incubator holds the mild, even temperature a culture needs, often 25 °C or 37 °C, sometimes with carbon dioxide. It is not a drying oven. Uniformity and, for cells, the gas control are the specification. A flask of cells in a drying oven is a dead flask.

Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?