Description
Cylinder calibration weight is a precision test weight for balance verification and routine metrology checks in the laboratory. It belongs to the cylinder-weight series covering nominal values from 1 g to 2 kg and is produced from special steel that is high-gloss polished, non-magnetizable and highly corrosion-resistant, with a density of 8,0 g/cm³. The polished surface and stable density support consistent handling and reliable mass reference during calibration work. Each piece is supplied in a plastic box that protects the finish during storage and transport. Net weight for this unit is 0,010 kg and gross weight is 0,040 kg, reflecting compact packaging suited to bench-top use. Offered by manufacturer Sartorius, the weight is intended for applications where non-magnetic behaviour and corrosion resistance are important for accurate weighing results. The cylinder form provides a practical geometry for placement on balance pans and for organised storage of individual reference masses in quality-control and service environments.
This article is part of Calibration & test weights, in Balances & scales.
Key features
- Pack size: 1 pc
- Density: 8,0 g/cm³
- Storage temperature: Room Temperature
- Product type: Cylinder calibration weight
- Material: Special steel, high-gloss polished
- Magnetic properties: Non-magnetizable
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Cylindrical Weight 10 g, OIML E2
What is this article?
Cylindrical Weight 10 g, OIML E2 is the article on this page. Luminix Health distributes Sartorius for laboratory use. It sits in Calibration & test weights, inside Balances & scales, in Lab instruments.
A test weight is a mass of a stated class, used to check a balance. The class sets the tolerance. A weight that is dirty, or that has been handled with bare fingers, is no longer that class. The certificate ties the weight to a standard.
A balance compares a mass with a standard. An analytical balance reads to 0.1 mg or finer and needs a draft shield and a stable bench. A precision balance is coarser and faster. A platform scale takes a heavier load. The reading is only as good as the calibration chain back to the kilogram, which is why test weights and a certificate exist. A moisture analyser is a balance with a heater: it records the loss of mass as water leaves. The unit of mass is kept by the BIPM, compared across Europe by EURAMET, and accredited by BELAC. NIST publishes the same measurement foundations.
Which category should I open next?
The category is Balances & scales. The sub-category is Calibration & test weights. The catalogue is Lab instruments.
Shelves beside this one are Precision balances, Balance accessories, calibration & certificates, Bench, platform & industrial scales, Analytical balances and Moisture analysers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.