Description
Density hydrometer 1,200–1,300:0,001 g/cm³ is intended for liquid density measurement in the range 1,200 to 1,300 g/cm³ with a scale division of 0,001 g/cm³. The instrument is 300 mm long and referenced to 20 °C, enabling density readings under a defined laboratory temperature basis. It is supplied without a thermometer, features bottom reading and is produced in simple quality with a consecutive serial number for easy tracking. This configuration suits routine determination of denser aqueous solutions, process liquids and similar samples that float the hydrometer within the stated window. Once immersed in a suitable cylinder, the graduated stem yields a direct density value at the 0,001 g/cm³ interval. Available as one piece from manufacturer Amarell, the hydrometer belongs to a consistent series of density instruments differing mainly by measuring span. Defined length, reference temperature, bottom-reading design and serial identification support organised use in quality-control, teaching and industrial laboratory environments where density between 1,200 and 1,300 g/cm³ must be read without an onboard thermometer.
This article is part of Hydrometers, in Density & viscosity measurement.
Key features
- Pack size: 1 pc
- Length: 300 mm
- Measuring range: 1,200–1,300 g/cm³
- Scale division: 0,001 g/cm³
- Reference temperature: 20 °C
- Thermometer: without
Recently viewed
You may also like
Questions about Density hydrometer, 1,200-1,300:0,001g/cm³, 300mm long, reference temperature
What is this article?
Density hydrometer, 1,200-1,300:0,001g/cm³, 300mm long, reference temperature is the article on this page. Luminix Health distributes Amarell for laboratory use. It sits in Hydrometers, inside Density & viscosity measurement, in Lab instruments.
A hydrometer floats in a liquid and the stem reading is the density or a related scale such as Brix. The liquid has to be at the temperature printed on the stem, or a correction is required. A chip on the stem changes the reading. One hydrometer does not cover every density.
Density is mass divided by volume. A hydrometer floats at a depth that depends on the density of the liquid. A pycnometer is a vessel of known volume that is weighed full. Viscosity is the resistance to flow. A capillary viscometer times how long a volume takes to fall through a tube. Both measurements need a stated temperature, because liquids change density and viscosity as they warm. The units trace to the BIPM and to NIST.
Which category should I open next?
The category is Density & viscosity measurement. The sub-category is Hydrometers. The catalogue is Lab instruments.
Shelves beside this one are Viscometers and Density meters & pycnometers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.