Description
Test tube rack with white plastic coating is a laboratory stand for securing tubes up to 25 mm diameter in two neat rows. It features two compartment levels and a welded wire-grid base (mesh width 8 mm), providing firm support while permitting drainage and air circulation under the tubes. Compartment size is 26 × 26 mm for vessels up to Ø 25 mm. The layout offers 2 rows by 12 columns, for 24 positions in total. Rack height is 100 mm, giving extra vertical clearance for taller tubes or deeper immersion contexts. The white plastic coating is temporarily resistant up to 150 °C, suitable for brief thermal contact during everyday laboratory procedures. This model from manufacturer Linker is intended for test tubes, centrifuge tubes and reaction vessels in research, education and quality-control environments. Supplied as 1 piece, the pale coating aids visual checking of tube contents and occupancy. Dual-level division maintains upright orientation during sample prep, short incubations or temporary holding. The open grid base reduces pooling of spills and eases cleaning. The taller 100 mm profile with a compact 2 × 12 footprint is practical where greater height stability is preferred without expanding the bench footprint excessively.
This article is part of Test tube racks, in Stands, clamps & racks.
Key features
- Pack size: 1 pc
- Colour: White
- Height: 100 mm
- Opening diameter: 25 mm
- Compartment size: 26 × 26 mm
- Positions: 2 × 12
- Technical Information Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Test tube racks, with white plastic coating, short-term bis 150° C resistant
What is this article?
Test tube racks, with white plastic coating, short-term bis 150° C resistant is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Test tube racks, inside Stands, clamps & racks, in Labware.
A test-tube rack holds tubes upright in an order the operator can read back. The hole diameter and the number of places have to match the tubes. An autoclave-safe rack and a cardboard rack are not interchangeable once heat is involved.
A stand, a clamp and a rack hold something still so the hands can do the work. A bosshead locks a clamp to a rod. A test-tube rack keeps tubes upright and in an order the operator can read back. The failure is almost always mechanical: the clamp slips, or the rack does not match the tube diameter. The glass they support is indexed under ISO laboratory glassware.
Which category should I open next?
The category is Stands, clamps & racks. The sub-category is Test tube racks. The catalogue is Labware.
Shelves beside this one are Stands, rods & bases, Clamps & bossheads and Stand & rack accessories.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
