Description
PMMA dome extraction hood is a transparent acrylic-glass canopy intended for laboratory source extraction. Made from clear polymethyl methacrylate, the dome design supports complete or partial coverage of a contamination source while keeping the work area fully visible. It is especially suited to gases with high buoyancy, where rising vapours need reliable local capture. Outer diameter is 350 mm and the connection diameter is 75 mm, so the hood fits source-extraction units 10157 and 10158. The material temperature range extends from −15 °C to +80 °C, covering typical laboratory operating conditions. Supplied as a single piece from manufacturer Asecos, this accessory integrates into fluid and gas extraction setups that require focused capture without blocking operator sight lines. Transparent construction enables continuous visual monitoring during extraction, and the dome geometry helps enclose the emission point efficiently. Laboratories use it wherever localised removal of buoyant fumes or vapours must be combined with unobstructed access and observation of the process underneath the hood.
This article is part of Half & full-face respirators, in Respiratory protection.
Key features
- Pack size: 1 pc
- Material: Transparent PMMA (acrylic glass)
- Design: Dome extraction hood
- Outer diameter: Ø 350 mm
- Connection diameter: Ø 75 mm
- EAN: 4250101141935
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Suction hood PMMA f QA laboratory 10157/10158 Dome-shaped hood
What is this article?
Suction hood PMMA f QA laboratory 10157/10158 Dome-shaped hood is the article on this page. Luminix Health distributes asecos for laboratory use. It sits in Half & full-face respirators, inside Respiratory protection, in Lab safety equipment.
A half-mask covers nose and mouth. A full-face mask adds the eyes and takes the same cartridges in a larger body. The cartridge, not the rubber facepiece, chooses the hazard. The mask has to be the size that seals, which is a fit test, not a guess from a shirt size.
A respirator filters the air the person breathes, or supplies other air. An FFP mask is a particle filter worn on the face. A half-mask or a full-face mask takes cartridges, and the cartridge is chosen for the gas or the particle. The mask that is not sealed to the face does not filter. Fit is part of the product. Standards are listed under ISO respiratory protection. The rule is the PPE Regulation. Workplace practice is EU-OSHA.
Which category should I open next?
The category is Respiratory protection. The sub-category is Half & full-face respirators. The catalogue is Lab safety equipment.
Shelves beside this one are FFP masks & dust masks and Respirator filters & cartridges.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.