Description
ICP Multi-Element Standard Solution A is a multi-element calibration standard from the ROTI®Star range, containing 24 elements in 5 % nitric acid for atomic spectroscopy. It is intended for ICP-OES and related spectrometric techniques that require a nitric acid matrix for multi-element calibration and quality control. The solution has a density of approximately 1 g/cm³ and a boiling point of about 100 °C, and is classified under UN number 3264. Supplied as 100 ml in an HDPE bottle, it offers a practical working volume for instrument calibration, drift monitoring and method development. Laboratories performing elemental analysis on environmental, industrial or research samples can use this blend to establish simultaneous calibration for a broad suite of analytes under consistent matrix conditions. The standard is available from manufacturer Carl ROTH as part of the ROTI®Star spectroscopy portfolio. A pre-mixed 24-element solution reduces preparation time compared with combining many single-element stocks and supports reproducible calibration setups. Solution A is a convenient choice for facilities that standardise ICP-OES or complementary ICP workflows on multi-element nitric acid standards and need ready-to-use reference material in a manageable pack size.
This article is part of ICP, AAS & ion standards, in Analytical standards & reference materials.
Key features
- Al (Aluminium): 1000 mg/l
- As (Arsenic): 100 mg/l
- B (Boron): 500 mg/l
- Ba (Barium): 500 mg/l
- Ca (Calcium): 1000 mg/l
- Cd (Cadmium): 100 mg/l
- Co (Cobalt): 500 mg/l
- Cr (Chrom): 500 mg/l
- Cu (Copper): 500 mg/l
- Fe (Iron): 1000 mg/l
- Pack size: 100 ml HDPE
- Density: ~1 g/cm³
- Boiling point: ~100 °C
- Brand line: ROTI®Star
- Composition: 24 elements in 5 % nitric acid
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information
DangerHazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Browse related categories
Category
Analytical standards & reference materials
Sub-category
Catalogue
Brand
Questions about ICP Multi-Element Standard Solution A, ROTI®Star, 100 ml, HDPE
What is this article?
ICP Multi-Element Standard Solution A, ROTI®Star, 100 ml, HDPE is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in ICP, AAS & ion standards, inside Analytical standards & reference materials, in Lab chemicals.
An ICP, AAS or ion standard is a solution of a stated element or ion at a stated concentration, with an uncertainty. It is the calibration point of a spectrometer or an electrode. The matrix, often dilute acid, has to match the method. A standard past its expiry is not that concentration.
A reference material is the article against which another result is compared. Its value is stated, and the uncertainty of that value is part of the product. An ICP or ion standard is a solution of known concentration. A volumetric standard is for titration. A chromatography standard is the peak you match. The grade names, including pharmacopoeia and ASTM, say which impurities were limited. Identity is checked on PubChem. Names follow IUPAC. Medicinal grades follow the European Pharmacopoeia and USP.
Which category should I open next?
The category is Analytical standards & reference materials. The sub-category is ICP, AAS & ion standards. The catalogue is Lab chemicals.
Shelves beside this one are Chromatography standards (GC, HPLC, pesticides), Reference substances & reagents (other), Volumetric standard solutions (titration), Reagents for analysis (Ph. Eur., ASTM, DIN), Spectroscopy & physical property standards and Indicators & indicator solutions.
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within two to five working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
