Description
BOLA swivel screw fittings GL 18 for outer diameters of 2,0 mm combine a PPS screw cap with PTFE inner parts to hold sensors, tubes or hoses in a defined position on laboratory glassware or apparatus. The sensor, tube or hose is first passed through the fitting; the assembly is then screwed onto the GL neck and the inserted element is locked at the required orientation. A maximum deflection angle of 10° allows limited angular adjustment while maintaining a secure mechanical grip. The fitting is specified for a sensor or tube outer diameter of 2,0 mm and connection thread GL 18. Supplied as one piece with a net weight of 0,0206 kg, this swivel screw fitting from manufacturer Bohlender supports flexible probe and tubing placement in laboratory setups where GL ports must accept small-diameter elements at a controlled angle without permanent fixed orientation. PTFE contact parts and the PPS cap provide a practical combination of chemical resistance and mechanical strength for routine lab use.
This article is part of Screw caps & closures, in Stoppers, caps & closures.
Key features
- Pack size: 1 pc(s)
- Material: Polytetrafluoroethylene (PTFE)
- Screw cap material: PPS
- Outer diameter: 2,0 mm
- Connection thread: GL 18
- Maximum deflection angle: 10°
- Technical Information Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about BOLA Swivelling screw fittings, GL 18, a Ø 2,0 mm, max. 10° PPS cap, inner parts
What is this article?
BOLA Swivelling screw fittings, GL 18, a Ø 2,0 mm, max. 10° PPS cap, inner parts is the article on this page. Luminix Health distributes Bohlender for laboratory use. It sits in Screw caps & closures, inside Stoppers, caps & closures, in Labware.
A screw cap has a thread and a liner. The thread has to match the bottle. The liner has to survive the liquid: a pulp liner fails in a solvent that a PTFE-faced liner ignores. The colour of the cap is not the specification.
A closure is the part that decides whether a bottle stays shut and whether the contents attack the seal. A ground-glass stopper matches a ground neck. A screw cap needs the right thread and a liner that survives the liquid. Rubber and silicone stoppers push into a mouth. The liner, not the colour of the cap, is the chemical choice. The vessels they close are indexed under ISO laboratory glassware.
Which category should I open next?
The category is Stoppers, caps & closures. The sub-category is Screw caps & closures. The catalogue is Labware.
Shelves beside this one are Rubber & silicone stoppers, Ground-joint glass stoppers, Lids & seals and Closures (other).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
