Description
Conductivity Standard Hamilton is a water-based conductivity standard specified at 1413 µS/cm (25 °C). The aqueous solution comes in a 500 ml pack for calibration and verification of conductivity meters and sensors in laboratory analysis. Physical properties include a density of 1 g/cm³ and a boiling point of 100 °C, consistent with a water-based matrix. Defined conductivity standards allow analysts to check electrode response and to document instrument setup before measurements on aqueous samples. The 1413 µS/cm value at 25 °C provides a working reference for many conductivity cells used with dilute aqueous media. This preparation from manufacturer Hamilton is intended for routine electroanalytical work that requires a water-based standard of stated conductivity. Bring the liquid to 25 °C when the method calls for temperature-matched calibration, and apply the instrument procedure for cell-constant or slope adjustment. The 500 ml volume supports repeated calibrations of bench and portable meters. With a density of 1 g/cm³, the solution handles similarly to other aqueous laboratory reagents used in conductivity measurement.
This article is part of Conductivity meters & cells, in pH & electrochemistry. See also pH meters.
Key features
- Pack size: 500 ml
- Density: 1 g/cm³
- Boiling point: 100 °C
- Conductivity: 1413 µS/cm (25 °C)
- Matrix: water-based
- Technical Information Sheet:
- Safety Data Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Conductivity Standard Hamilton, 1413 µS/cm (25 °C), 500 ml
What is this article?
Conductivity Standard Hamilton, 1413 µS/cm (25 °C), 500 ml is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Conductivity meters & cells, inside pH & electrochemistry, in Lab instruments.
A conductivity meter and its cell measure how well a solution carries current. The cell constant is the geometry that converts conductance to conductivity, and it is calibrated with a standard. Temperature compensation matters because conductivity rises with temperature.
A pH meter is a voltmeter on a glass electrode. The voltage tracks hydrogen-ion activity, and the electrode is converted to pH only after it is adjusted with buffers of known value. Conductivity measures how well a solution carries a current, which for dilute salts tracks concentration. Dissolved oxygen and titration are further electrodes on the same idea: a sensor, a standard, and a reading that is only as fresh as the calibration. Buffer values and chemical identity sit on PubChem. Accreditation of the calibration laboratory is the field of BELAC and EURAMET.
Which category should I open next?
The category is pH & electrochemistry. The sub-category is Conductivity meters & cells. The catalogue is Lab instruments.
Shelves beside this one are pH electrodes & sensors, pH meters, Dissolved oxygen & multiparameter meters, Titrators & electrochemistry systems and pH & electrochemistry accessories.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
