Description
Cylindrical calibration weight is a precision test mass for balance and scale verification in laboratory and industrial metrology. It forms part of the cylindrical weight range from 100 g to 10 kg and is manufactured from high-gloss polished special steel that is non-magnetizable and highly corrosion-resistant. Density is specified at 8,0 g/cm³, supporting consistent mass behaviour under standard calibration conditions. The unit has a net weight of 2,800 kg and is delivered as a single piece in a plastic box that protects the high-gloss surface between uses. Special-steel construction with high corrosion resistance suits repeated handling in quality-control, service and production environments where cylindrical reference weights are required. This calibration weight from manufacturer Sartorius is appropriate for instrument adjustment, routine checks and formal verification workflows. Gross weight including packaging is 2,900 kg. The protective plastic box keeps the polished cylinder ready for bench use or storage alongside other reference masses without compromising surface finish.
This article is part of Calibration & test weights, in Balances & scales.
Key features
- Pack size: 1 pc(s)
- Density: 8,0 g/cm³
- Storage temperature: Room Temperature
- Type: Cylindrical calibration weight
- Material: High-gloss polished special steel
- Magnetic properties: Non-magnetizable
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Cylindrical Weight 2 kg, OIML F2, DAkkS
What is this article?
Cylindrical Weight 2 kg, OIML F2, DAkkS is the article on this page. Luminix Health distributes Sartorius for laboratory use. It sits in Calibration & test weights, inside Balances & scales, in Lab instruments.
A test weight is a mass of a stated class, used to check a balance. The class sets the tolerance. A weight that is dirty, or that has been handled with bare fingers, is no longer that class. The certificate ties the weight to a standard.
A balance compares a mass with a standard. An analytical balance reads to 0.1 mg or finer and needs a draft shield and a stable bench. A precision balance is coarser and faster. A platform scale takes a heavier load. The reading is only as good as the calibration chain back to the kilogram, which is why test weights and a certificate exist. A moisture analyser is a balance with a heater: it records the loss of mass as water leaves. The unit of mass is kept by the BIPM, compared across Europe by EURAMET, and accredited by BELAC. NIST publishes the same measurement foundations.
Which category should I open next?
The category is Balances & scales. The sub-category is Calibration & test weights. The catalogue is Lab instruments.
Shelves beside this one are Precision balances, Balance accessories, calibration & certificates, Bench, platform & industrial scales, Analytical balances and Moisture analysers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
