Description
Calibration weight in accuracy class F1 is an individual precision mass piece intended for balance calibration and verification in laboratory and industrial weighing practice. It is produced from high-gloss polished special steel that is non-magnetizable and highly corrosion-resistant, with a specified density of 8,0 g/cm³. The weight belongs to the F1 single-weight series spanning nominal values from 1 g to 50 kg. Supplied as one piece, units up to 20 g ship in a plastic box and weights from 50 g use a wooden case; this item shows a net weight of 0,005 kg and gross weight of 0,050 kg. High-gloss special-steel construction from manufacturer Sartorius supports corrosion resistance and stable surface quality under repeated handling. F1 calibration weights serve quality-control laboratories, service workshops and production sites needing intermediate accuracy for checks of analytical and precision balances. The non-magnetizable character reduces magnetic interference, while the polished finish simplifies cleaning and inspection between uses. This single reference mass integrates readily into existing test-weight sets and routine verification procedures.
This article is part of Calibration & test weights, in Balances & scales.
Key features
- Pack size: 1 pc
- Density: 8,0 g/cm³
- Storage temperature: Room Temperature
- Accuracy class: F1
- Material: Special steel, high-gloss polished
- Magnetic properties: Non-magnetizable
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Cylindrical Weight 5 g, OIML F1, DAkkS
What is this article?
Cylindrical Weight 5 g, OIML F1, DAkkS is the article on this page. Luminix Health distributes Sartorius for laboratory use. It sits in Calibration & test weights, inside Balances & scales, in Lab instruments.
A test weight is a mass of a stated class, used to check a balance. The class sets the tolerance. A weight that is dirty, or that has been handled with bare fingers, is no longer that class. The certificate ties the weight to a standard.
A balance compares a mass with a standard. An analytical balance reads to 0.1 mg or finer and needs a draft shield and a stable bench. A precision balance is coarser and faster. A platform scale takes a heavier load. The reading is only as good as the calibration chain back to the kilogram, which is why test weights and a certificate exist. A moisture analyser is a balance with a heater: it records the loss of mass as water leaves. The unit of mass is kept by the BIPM, compared across Europe by EURAMET, and accredited by BELAC. NIST publishes the same measurement foundations.
Which category should I open next?
The category is Balances & scales. The sub-category is Calibration & test weights. The catalogue is Lab instruments.
Shelves beside this one are Precision balances, Balance accessories, calibration & certificates, Bench, platform & industrial scales, Analytical balances and Moisture analysers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
