Description
Dynamic climate chamber MK 56-240V is a compact environmental simulation cabinet for heat and cold tests from −40 °C to +180 °C. With a nominal volume of 53 l, stainless-steel interior and APT.line™ preheating chamber technology plus forced-air circulation, it provides homogeneous temperature control for cyclic testing without complex custom solutions. Programmable condensation protection helps protect samples, and a viewing window with interior lighting supports visual checks during operation. Refrigeration uses a compression cooling machine with CFC-free refrigerant R-452A. An intuitive touchscreen controller offers time-segment and real-time programming, adjustable ramp functions, an integrated chart recorder and real-time clock; an internal data logger allows measured values to be read out in open format via USB. Device self-test for comprehensive status analysis, a 50 mm access port with silicone plug on the left, class 2 temperature safety device (DIN 12880) with optical alarm, fault diagnosis with optical and acoustic signals, Ethernet interface and BINDER Multi Management Software APT-COM™ Basic Edition round out the specification. Supplied as 1 pc on four castors (two lockable) from manufacturer Binder, the MK series unit is a practical choice for precise cyclic temperature testing in the laboratory.
This article is part of Drying ovens & climate chambers, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Temperature range: −40 °C to +180 °C
- Nominal volume: 53 l
- Cooling system: Compression refrigeration (R-452A)
- Controller: Touchscreen with time-segment and real-time programming
- Interior: Stainless steel with APT.line™ technology
- Manufacturer: Binder
- UNSPSC: 41104900
- Interior dimensions: 400 × 350 × 420 mm (W × D × H)
- Exterior dimensions: 720 × 778 × 1445 mm (W × D × H)
- Weight, empty: 165 kg
- Voltage: 240 V, 60 Hz
- Nominal power: 2.8 kW
- Temperature uniformity, depending on setpoint: ±0.5...±1.5 K
- Temperature fluctuation, depending on setpoint: ±0.1...±0.5 K
- Average heating-up rate between -40 °C and 180 °C: 5 K/min
- Cooling-down time from 180 °C to -40 °C: 90 min
- Average cooling-down time between 180 °C and -40 °C: 5 K/min
- Shelves, standard / maximum: 1/4
- Load per rack: 15 kg
- Permitted load: 60 kg
- Energy consumption at 20 °C: 600 Wh/h
- Wall clearance, side: 200 mm
- Wall clearance, back: 300 mm
- Sound pressure level: 59 dB(A)
- Technical Information Sheet:
- Data Sheet:
Recently viewed
You may also like
Questions about Dynamic climate chambers MK 56-240V
What is this article?
Dynamic climate chambers MK 56-240V is the article on this page. Luminix Health distributes Binder for laboratory use. It sits in Drying ovens & climate chambers, inside Heating, drying & cooling, in Lab instruments.
A drying oven holds a temperature above ambient to drive off water or to condition a sample. A climate chamber also holds humidity. Uniformity across the chamber, not only the set point, decides whether two samples on different shelves saw the same conditions.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Drying ovens & climate chambers. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.