Description
Stainless steel test sieve Ø 100 × 45 mm with stainless steel test sieve mesh to ISO 3310-1 is a precision instrument for particle-size determination in analytical laboratories. The sieve offers a mesh aperture of 100 µm, equivalent to 0,1 mm, enabling accurate fractionation of powders, granules and other particulate solids. Its frame has a diameter of 100 mm and a height of 45 mm and is fabricated entirely from stainless steel, combining mechanical strength with resistance to corrosion. Each unit is accompanied by a factory certificate 2.1 in accordance with EN 10204, supporting traceable quality documentation. Available from manufacturer Linker, this test sieve is well suited to routine sieve analysis in research, quality-control and production environments. The standardised mesh geometry promotes reproducible results from batch to batch, while the robust stainless-steel construction withstands repeated cleaning and handling. The sieve can be used individually or stacked with matching frames for multi-fraction separations. Pack size is one piece, ready for immediate integration into existing laboratory workflows and particle characterisation protocols.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 100 mm
- Height: 45 mm
- Mesh size: 100 µm
- Mesh aperture: 0,1 mm
- Material: Stainless steel
- Technical Information Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel test sieve Ø 100 x 45 mm, stainless steel test sieve cloth ISO 3310-1
What is this article?
Stainless steel test sieve Ø 100 x 45 mm, stainless steel test sieve cloth ISO 3310-1 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
