Description
Stainless steel test sieve Ø 100 × 45 mm with 450 µm mesh is a precision laboratory sieve intended for particle size analysis to ISO 3310-1. It features a stainless steel frame and stainless steel woven test sieve mesh for durable performance in everyday analytical work. With a diameter of 100 mm and a height of 45 mm, the compact design suits smaller sample loads and standard bench-top procedures. The mesh aperture of 0,45 mm enables consistent separation and grading of powders, granules and similar particulate solids. Offered as a single piece, the sieve from manufacturer Linker includes a factory certificate 2.1 in accordance with EN 10204, supporting traceability requirements in laboratory environments. Stainless steel construction provides mechanical strength and ease of cleaning after use. Applications cover quality control, R&D and process monitoring wherever reproducible particle-size distribution results are needed. Compliance of the mesh with ISO 3310-1 helps ensure aperture accuracy and comparable outcomes between successive sieving runs and different laboratories.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 100 mm
- Height: 45 mm
- Mesh size: 0,45 mm
- Material: Stainless steel
- Standard: ISO 3310-1
- Technical Information Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel test sieve Ø 100 x 45 mm, stainless steel test sieve cloth ISO 3310-1
What is this article?
Stainless steel test sieve Ø 100 x 45 mm, stainless steel test sieve cloth ISO 3310-1 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.