Description
Stainless steel test sieve Ø 200 x 25 mm with stainless steel test sieve mesh to ISO 3310-1 is a laboratory analysis sieve for controlled particle-size separation. The woven stainless steel mesh has a defined aperture of 500 µm (0,5 mm), supporting reproducible fractionation of powders, granules and bulk solids in quality-control and research workflows. The circular frame is 200 mm in diameter and 25 mm high and is made entirely of stainless steel for mechanical stability and chemical resistance during repeated sieving. Mesh and frame are joined by soft PVC welding and supplied with a factory certificate 2.1 EN 10 238, documenting the construction as stated by the manufacturer. Offered as a single piece from manufacturer Linker, the sieve is intended for use in standard analytical sieve stacks where ISO 3310-1 mesh geometry is required. Its compact 25 mm height allows convenient nesting, while the robust stainless steel build suits routine laboratory and industrial particle characterisation. The unit provides a clearly specified aperture and durable frame for consistent separation performance without additional accessories.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Material: Stainless steel
- Diameter: 200 mm
- Height: 25 mm
- Mesh size: 500 µm (0,5 mm)
- Sieve mesh: Stainless steel, ISO 3310-1
- Technical Information Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel analytical sieve Ø 200 x 25 mm, stainless steel analytical sieve cloth ISO 3310-1
What is this article?
Stainless steel analytical sieve Ø 200 x 25 mm, stainless steel analytical sieve cloth ISO 3310-1 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
