Description
Stainless steel test sieve Ø 300 × 55 mm with stainless steel test sieve mesh to ISO 3310-1 is a precision laboratory sieve for fine particle-size analysis. The frame diameter is 300 mm and the height is 55 mm, while the woven stainless steel mesh provides a mesh size of 0,025 mm (25 µm) for separation of fine powders and particulate fractions. Stainless steel construction of both frame and cloth delivers mechanical strength and corrosion resistance for repeated dry sieving in analytical, quality-control and research settings. Each sieve is supplied with a factory certificate 2.1 EN 10 205, supporting traceability of manufacture within laboratory quality systems. The ISO 3310-1 mesh ensures controlled aperture geometry for reproducible results when the sieve is operated alone or stacked with complementary apertures. From manufacturer Linker, this single-piece 300 mm test sieve is suited to sample preparation, particle characterisation and process monitoring wherever a fine 25 µm stainless steel analysensieb with a 55 mm rim height is required for accurate laboratory screening.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 300 mm
- Height: 55 mm
- Mesh size: 0,025 mm (25 µm)
- Material: Stainless steel
- Mesh standard: ISO 3310-1
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel analytical sieve Ø 300 x 55 mm, stainless steel analytical sieve cloth ISO 3310-1
What is this article?
Stainless steel analytical sieve Ø 300 x 55 mm, stainless steel analytical sieve cloth ISO 3310-1 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.