Description
Stainless steel test sieve Ø 305 mm (12'') × 55 mm with stainless steel test sieve mesh conforming to ISO 3310-1 supports accurate particle-size determination in analytical laboratories. The mesh aperture of 3,35 mm defines a clear cut size for classifying powders, granules and particulate materials by dry or wet sieving. Both frame and woven cloth are stainless steel, ensuring mechanical robustness and resistance to wear in routine sieve-stack operation. Offered as one piece from manufacturer Linker, the sieve is accompanied by a factory certificate 2.1 EN 10 218 for documentation needs. Its 305 mm diameter and 55 mm height match common 12-inch laboratory sieve formats used in materials science, pharmaceutical QC, food technology and industrial process control. Stable aperture geometry and durable construction help maintain reproducible granulometric data across repeated analytical cycles.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 305 mm
- Height: 55 mm
- Mesh size: 3,35 mm
- Material: Stainless steel
- Standard: ISO 3310-1
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel test sieve Ø 305 (12'') x 55 mm, stainless steel sieve mesh ISO
What is this article?
Stainless steel test sieve Ø 305 (12'') x 55 mm, stainless steel sieve mesh ISO is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.