Description
Stainless steel test sieve Ø 50 x 25 mm with stainless steel analytical sieve mesh to ISO 3310-1 is built for accurate particle-size classification in the laboratory. Mesh aperture is 212 µm (0,212 mm), providing a defined cut for powders, granules and other particulate samples in analytical and quality-control sequences. The frame measures 50 mm in diameter and 25 mm in height, making the sieve practical for small sample volumes and compact multi-sieve stacks while retaining mechanical stability in wet or dry operation. Stainless steel construction delivers corrosion resistance and simplifies cleaning between runs. Each sieve includes a works certificate 2.1 EN 10 228, supporting traceability requirements in documented laboratory systems. Offered by manufacturer Linker, the unit addresses routine sieving tasks that demand standardised ISO 3310-1 aperture geometry together with robust metal fabrication. It is suitable for pharmaceutical, chemical, food and materials laboratories specifying a 212 µm mesh for screening, batch release checks or sample preparation. Pack size is one piece for standalone use or integration into sieve sets.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Material: Stainless steel
- Diameter: 50 mm
- Height: 25 mm
- Mesh size: 0,212 mm (212 µm)
- Mesh standard: ISO 3310-1
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel-analytical sieve Ø 50 x 25 mm, stainless steel analytical sieve mesh ISO 3310-1, with
What is this article?
Stainless steel-analytical sieve Ø 50 x 25 mm, stainless steel analytical sieve mesh ISO 3310-1, with is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
