Description
Stainless steel test sieve Ø 500 x 80 mm with stainless steel test sieve mesh conforming to ISO 3310-1 is intended for particle size analysis in laboratory environments. The sieve features a mesh aperture of 180 µm, corresponding to 0,18 mm, for separation of solid particulate samples. With a diameter of 500 mm and a height of 80 mm, the frame offers a large screening surface suited to analytical sieving tasks. The construction uses stainless steel for both the frame and the woven mesh, providing durability in routine laboratory handling. Mesh geometry follows the requirements of ISO 3310-1. Each unit is delivered with a works certificate 2.1 EN 10 226 from manufacturer Linker. This analytical sieve is used for particle size determination of powders and granular materials in quality control and research settings. The stainless steel design supports repeated use and cleaning between samples. It is suitable for integration into standard laboratory sieve analysis workflows where ISO 3310-1 mesh is specified.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 500 mm
- Height: 80 mm
- Mesh size: 0,18 mm
- Mesh aperture: 180 µm
- Material: Stainless steel
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel analytical sieve Ø 500 x 80 mm, stainless steel analytical sieve cloth ISO 3310-1
What is this article?
Stainless steel analytical sieve Ø 500 x 80 mm, stainless steel analytical sieve cloth ISO 3310-1 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
