Description
Stainless steel test sieve Ø 500 × 80 mm with stainless steel analysis sieve mesh conforming to ISO 3310-1 supports accurate particle-size classification in analytical and quality-control laboratories. The frame has a diameter of 500 mm and a height of 80 mm and carries a stainless steel woven mesh with a 25 mm aperture for efficient separation of coarse material fractions. Entirely stainless steel construction delivers durability and chemical resistance for routine dry or wet sieving of minerals, aggregates, powders and bulk solids. The unit is accompanied by a works certificate 2.1 according to EN 10204, aiding traceability and material documentation requirements. ISO 3310-1 compliant mesh from manufacturer Linker contributes to defined aperture geometry and comparable results across instruments and sites. Offered as a single piece, this large-format sieve integrates into conventional sieve stacks and shaker systems used in construction materials testing, mining laboratories and industrial process control. The generous working diameter allows higher sample loadings while maintaining secure stacking during mechanical agitation.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 500 mm
- Height: 80 mm
- Mesh size: 25 mm
- Material: Stainless steel
- Standard: ISO 3310-1
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel analytical sieve Ø 500 x 80 mm, stainless steel analytical sieve cloth ISO 3310-1
What is this article?
Stainless steel analytical sieve Ø 500 x 80 mm, stainless steel analytical sieve cloth ISO 3310-1 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
