Description
NANOCOLOR VARIO 4 thermoblock is a laboratory heating block equipped with two separately controllable heating units for parallel sample digestion and temperature-controlled preparation steps. Each unit provides twelve bores for round cuvettes with 16 mm outer diameter, giving a total capacity of 2 × 12 positions and allowing independent temperature programmes on the two sides. The instrument is delivered with a mains cable, two separately hinged protective covers, handbook, data cable and software DVD, so installation and method transfer can begin immediately after unpacking. A net weight of 4,20 kg reflects a robust benchtop design suited to continuous use in water-analysis and environmental laboratories. The thermoblock comes from manufacturer Macherey-Nagel and complements NANOCOLOR photometric test systems that require defined heating of round cuvettes before measurement. One complete unit is supplied per pack for integration into spectroscopy sample-preparation workflows where dual-zone control and standard 16 mm cuvette geometry are required.
This article is part of Hot plates & heating blocks, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Product line: NANOCOLOR VARIO 4 thermoblock
- Heating units: Two separately controllable heating units
- Bore configuration: 2 × 12 holes for round cuvettes 16 mm OD
- EAN: 4046681005855
- Technical Information Sheet:
- Safety Data Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Heating block Vario 4
What is this article?
Heating block Vario 4 is the article on this page. Luminix Health distributes Macherey-Nagel for laboratory use. It sits in Hot plates & heating blocks, inside Heating, drying & cooling, in Lab instruments.
A hot plate heats a flat-bottom vessel from below, often with stirring. A heating block holds tubes in machined holes so each tube sees the same temperature. The block's hole diameter has to match the tube, or the heat never arrives.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Hot plates & heating blocks. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Drying ovens & climate chambers, Water & oil baths, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within two to five working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
