Description
Heating cable PILZ® WKG (150W/m) glass silk insulated 900W, length 6,0m, Tmax. 400°C 230V, connecting cable 1,0m
Operation together with a temperature controller is always recommended.
Technical Data/Structure
- One heating spiral
- Glass silk insulated heating cable
- Outer braid: flexible glas silk (two layers)
- Nominal voltage: 230 VAC
- Mains connection: both sides ready for connection 1,0m
- Construction type: not moisture resistant
- Dimensions: Ø 6,0 mm
- Min. bending radius: > 6 mm
Application
In laboratories and experimental facilities where an easily employed system is
desired to heat shapes and parts to high temperatures or where it is important
to ensure short heating-up periods.
Advantages
- very high and constant heating power output per meter
- high operating temperature
- extremely flexible
- quick and easy installation
- cost effective
Please note:
- the high power output (W/m) requires a good heat-transfer
contact with the object to be heated.
- to avoid overheating, heating tapes or cables must installed in such
a way that they are not in contact with each other or overlapping.
- the surface temperature of the switched on heating system
is always higher than the pipe temperature.
- series resistance heating cables and tapes must be operated
with a temperature controller
Operation together with a temperature controller is always recommended.
old item number: WKG00401-230XX400-06000900
Operation together with a temperature controller is always recommended.
Technical Data/Structure
- One heating spiral
- Glass silk insulated heating cable
- Outer braid: flexible glas silk (two layers)
- Nominal voltage: 230 VAC
- Mains connection: both sides ready for connection 1,0m
- Construction type: not moisture resistant
- Dimensions: Ø 6,0 mm
- Min. bending radius: > 6 mm
Application
In laboratories and experimental facilities where an easily employed system is
desired to heat shapes and parts to high temperatures or where it is important
to ensure short heating-up periods.
Advantages
- very high and constant heating power output per meter
- high operating temperature
- extremely flexible
- quick and easy installation
- cost effective
Please note:
- the high power output (W/m) requires a good heat-transfer
contact with the object to be heated.
- to avoid overheating, heating tapes or cables must installed in such
a way that they are not in contact with each other or overlapping.
- the surface temperature of the switched on heating system
is always higher than the pipe temperature.
- series resistance heating cables and tapes must be operated
with a temperature controller
Operation together with a temperature controller is always recommended.
old item number: WKG00401-230XX400-06000900