Description
Incubator IF55 is a forced-air laboratory incubator with a nominal volume of 53 l and a temperature setting range from +20 °C to +80 °C. Working temperature starts at least 10 °C above ambient and reaches +80 °C. SingleDISPLAY with ControlCOCKPIT enables electronic adjustment of the exhaust air flap and fan speed from 0 % to 100 % in 10 % steps. One grid shelf, an outer stainless-steel door and an inner glass door are provided. An Ethernet interface allows protocol data readout. Double overtemperature protection, an integrated data logger with at least ten-year capacity and three adjustable calibration values support dependable operation. A factory calibration certificate for +37 °C is included. Structured stainless-steel housing measures 585 x 784 x 514 mm, while the stainless-steel interior is 400 x 400 x 330 mm. Rated 230 V, 50/60 Hz at approximately 1000 W maximum, this compact incubator from manufacturer Memmert is suited to controlled incubation in research and routine laboratories.
This article is part of Incubators, in Heating, drying & cooling.
Key features
- Pack size: 1 piece
- Nominal volume: 53 l
- Temperature setting range: +20 °C to +80 °C
- Display: SingleDISPLAY
- Grid shelves: 1
- Interior dimensions: 400 x 400 x 330 mm
- Manufacturer: Memmert
- UNSPSC: 41104401
- Working temperature range: at least 10 °C above ambient up to 80 °C
- Setting temperature range: 20...80 °C
- Exterior dimensions: 585 × 784 × 514 mm
- Voltage: 230 V, 50/60 Hz
- Power consumption: approx. 1000 W
- Volume: 53 l
- Technical Information Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Incubator IF55, 53l, 20-80°C
What is this article?
Incubator IF55, 53l, 20-80°C is the article on this page. Luminix Health distributes Memmert for laboratory use. It sits in Incubators, inside Heating, drying & cooling, in Lab instruments.
An incubator holds the mild, even temperature a culture needs, often 25 °C or 37 °C, sometimes with carbon dioxide. It is not a drying oven. Uniformity and, for cells, the gas control are the specification. A flask of cells in a drying oven is a dead flask.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Incubators. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Drying ovens & climate chambers, Water & oil baths, Hot plates & heating blocks, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
