Description
KW6N behrotest cooling trough is a laboratory accessory designed for use with the Einsatzgestell E6/B rack in water and wastewater analysis workflows. This cooling trough provides a dedicated bath-style vessel that supports controlled cooling of samples or digestion setups when paired with the matching rack system. Supplied as a single piece, it integrates into behrotest sample-preparation and analytical configurations commonly used in environmental laboratories. The unit is offered from manufacturer Behr and is intended as complementary equipment for structured rack-based work rather than as a standalone analyser. Gross weight is 4,50 kg, with packed dimensions of 0,32 m depth, 0,38 m width and 0,18 m height and a packaging volume of 0,021888 m³. Country of origin is Germany. In routine laboratory practice the KW6N trough helps organise cooled sample handling around the E6/B rack, supporting orderly arrangement during multi-sample procedures in water and wastewater analytics. It is suited to laboratories that already operate or plan to operate the corresponding behrotest rack and require a matching cooling trough for consistent setup geometry and workflow continuity.
This article is part of Mills, grinders & homogenisers, in Test sieves & mills.
Key features
Recently viewed
You may also like
Questions about KW6N behrotest COD cooling bath for vessel frame E6/B
What is this article?
KW6N behrotest COD cooling bath for vessel frame E6/B is the article on this page. Luminix Health distributes Behr for laboratory use. It sits in Mills, grinders & homogenisers, inside Test sieves & mills, in Lab instruments.
A mill, grinder or homogeniser reduces particle size or breaks a tissue before an extraction. The rotor and the sieve insert decide the result. A knife mill and a bead mill are different machines. The sample has to tolerate the heat the motor puts into it.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Mills, grinders & homogenisers. The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Sieve shakers and Sieve accessories (lids, pans, rings).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.


















