Description
LINKER analytical sieve Ø 200 mm with stainless steel frame and internal height 50 mm is a laboratory test sieve for fine particle separation using nylon sieve mesh. The frame diameter is 200 mm and the internal height is 50 mm, while the covering is nylon sieve fabric to DIN 4197 with a mesh aperture of 11 µm (0,011 mm). An identification number and a works certificate 2.1 according to EN 10 204 accompany the sieve, supporting traceable use in controlled analytical workflows. Manufactured by Linker, this model is intended for laboratories that require a stainless steel body combined with fine polymer mesh for gentle classification of powders, suspensions or other particulate samples. The 200 mm format fits common analytical sieve stacks, and the 50 mm internal height provides working volume for practical sample loads. Supplied as 1 piece, it is suitable for quality control, research and process monitoring where DIN 4197 nylon mesh and documented factory certification are specified. Clear statement of diameter, frame height and micrometre-range aperture helps maintain consistent separation conditions from run to run.
This article is part of Test sieves (wire mesh), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 200 mm
- Internal height: 50 mm
- Frame material: Stainless steel
- Mesh material: Nylon sieve mesh DIN 4197
- Mesh size: 11 µm (0,011 mm)
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about LINKER analytical sieve Ø 200 mm, stainless steel frame, internal height 50 mm, nylon mesh 11 µm
What is this article?
LINKER analytical sieve Ø 200 mm, stainless steel frame, internal height 50 mm, nylon mesh 11 µm is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Test sieves (wire mesh), inside Test sieves & mills, in Lab instruments.
A wire-mesh test sieve sorts particles through a woven opening of a stated nominal size. The frame diameter and the mesh are the specification. A sieve without a certificate is a screen, not a measurement.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Test sieves (wire mesh). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (perforated plate), Mills, grinders & homogenisers, Sieve shakers and Sieve accessories (lids, pans, rings).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.