Description
NEXOPART test sieve with stainless steel frame 200 × 50 mm and square-hole perforated plate is an analytical sieve intended for coarse particle-size separation according to DIN ISO 3310-2. The square-hole plate provides a large aperture of 112,00 mm, suited to primary fractionation of oversized granules, aggregates and bulk solids before finer sieving stages. Frame diameter is 200 mm and height is 50 mm, offering additional depth for higher sample loads while remaining compatible with common laboratory sieve stacks and shakers. Net weight is 0,61 kg. Constructed entirely in stainless steel, the sieve combines mechanical robustness with corrosion resistance for repeated use in dry or wet workflows. From manufacturer NEXOPART, this model supports materials laboratories, mineral processing, construction-material testing and industrial quality control where a defined coarse cut is required. The perforated-plate geometry maintains consistent opening size for reproducible results. Supplied as a single piece, the sieve slots readily into multi-deck analytical sequences and complements finer mesh sieves in full particle-size distribution studies under the cited ISO standard.
This article is part of Test sieves (perforated plate), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Aperture: 112,00 mm
- Diameter: 200 mm
- Height: 50 mm
- Material: Stainless steel
- Perforation: Square-hole perforated plate
- Technical Information Sheet:
Recently viewed
You may also like
Questions about NEXOPART Test Sieve with stainless steel frame 200X50 mm - with perforated steel
What is this article?
NEXOPART Test Sieve with stainless steel frame 200X50 mm - with perforated steel is the article on this page. Luminix Health distributes NEXOPART for laboratory use. It sits in Test sieves (perforated plate), inside Test sieves & mills, in Lab instruments.
A perforated-plate sieve sorts particles through punched holes rather than a woven mesh. It is used for coarser cuts, where a wire would be too fragile. The hole size and the frame still have to be the stated ones.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Test sieves (perforated plate). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Mills, grinders & homogenisers, Sieve shakers and Sieve accessories (lids, pans, rings).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
