Description
Phosphate buffer solution 0,1 M pH 8.0 is a ready-to-use analytical buffer prepared for laboratory procedures that require a moderately concentrated alkaline phosphate system. The solution is specified at 0,1 M and pH 8.0 and meets Reag. Ph. Eur. 4.1.3. According to the manufacturer description, it has a density of approximately 1 g/cm³ and a boiling point of 100 °C, providing clear physical reference points for handling and process design. Available in a 1 l unit from manufacturer Carl ROTH, this phosphate buffer supports analytical chemistry and quality-control work where Ph. Eur. 4.1.3 reagents are specified. The 0,1 M strength at pH 8.0 is suitable for applications that need greater buffering capacity than dilute stocks while remaining convenient for direct use. Laboratories can incorporate the solution into sample preparation, method validation, and routine measurements without intermediate formulation steps. As a member of the specialised pH-buffer solutions category, it offers a consistent composition for stable pH control. Documented density and boiling behaviour assist safe storage planning and laboratory documentation within regulated or standardised analytical environments.
This article is part of pH buffers & conductivity standards, in Buffers & pH solutions.
Key features
Recently viewed
You may also like
Questions about Phosphate buffer solution 0.1 M pH 8.0, Reag. Ph. Eur. 4.1.3, 4008400, 1 l
What is this article?
Phosphate buffer solution 0.1 M pH 8.0, Reag. Ph. Eur. 4.1.3, 4008400, 1 l is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in pH buffers & conductivity standards, inside Buffers & pH solutions, in Lab chemicals.
A pH buffer for calibration has a stated pH at a stated temperature, often traceable. A conductivity standard has a stated conductivity. They are not general reagents and they should not be poured back into the bottle. The temperature of the measurement has to be the temperature on the label, or the meter has to compensate.
A buffer resists a change in pH when a little acid or base is added. It does that because a weak acid and its conjugate base are both present. A pH buffer used to calibrate a meter has a stated value at a stated temperature. A biological buffer such as Tris or HEPES is chosen because it holds the pH of a living system and does not poison it. Conductivity standards are the sister articles for a conductivity meter. The ions are on PubChem. Electrode calibration practice sits with EURAMET and BELAC.
Which category should I open next?
The category is Buffers & pH solutions. The sub-category is pH buffers & conductivity standards. The catalogue is Lab chemicals.
Shelves beside this one are Biological buffers (Tris, HEPES, MOPS) and Buffers (other).
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.




















