Description
Silicate-insulated heating tape MIL-HT-H provides a flexible high-temperature heating solution for laboratory vessels, piping and process equipment. This 1,0 m length delivers a rated power of 350 W at 230 V AC and utilises heat-resistant quartz glass yarn silicate insulation capable of a maximum heating-conductor temperature of 900 °C. The tape cross-section is 30 x 5 mm with a minimum bending radius greater than 15 mm, enabling close contact around curved surfaces. It is supplied not moisture-protected and without protective-conductor braid, factory-finished with a 1,0 m connection cable without plug for immediate installation. Offered by manufacturer ISOHEAT/SAF Wärmetechnik, the MIL-HT-H series is intended for container heating, heat tracing and similar thermal applications that demand elevated surface temperatures and high power density. Special lengths and other power ratings can be supplied on request. Net and gross weight are each 0,2 kg, supporting convenient handling and positioning in research, pilot-plant or production settings where controlled heating is required.
This article is part of Heating tapes, cables & plates, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Length: 1,0 m
- Rated power: 350 W
- Rated voltage: 230 V AC
- Dimensions: 30 x 5 mm
- Max. heating conductor temperature: 900 °C
- Technical Information Sheet:
Recently viewed
You may also like
Questions about Silikat insulated heating tape MIL-HT-H, 1,0 m, 350 W / 230 V
What is this article?
Silikat insulated heating tape MIL-HT-H, 1,0 m, 350 W / 230 V is the article on this page. Luminix Health distributes ISOHEAT/SAF Wärmetechnik for laboratory use. It sits in Heating tapes, cables & plates, inside Heating, drying & cooling, in Lab instruments.
A heating tape or cable wraps a tube, a valve or a vessel that has no mantle. Power per length and the maximum temperature are the specification. A tape overlapped on itself overheats. It needs a controller. Plugged straight in, it does not hold a set point.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Heating tapes, cables & plates. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Drying ovens & climate chambers, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers and Bunsen & gas burners.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
