Description
Stopper, PP, for tubes Ø 16 mm is a polypropylene laboratory stopper designed to close tubes with a 16 mm outer diameter. Moulded from PP, it provides a simple, reusable closure for temporary sealing during sample holding, transport between benches, or short-term storage in volumetric and general labware setups. The fit is intended for matching 16 mm tubes, helping reduce splash and evaporation risk in day-to-day handling. Supplied in packs of 20 pc(s), the stoppers are practical for equipping multiple stations or replenishing shared consumable drawers. These PP stoppers from manufacturer Nalgene suit routine laboratory vessel work where a lightweight plastic plug is preferred over glass or rubber alternatives. Pack weight is 0,045 kg, so the unit is easy to store and issue. They support research, teaching, and quality-control environments that standardise on 16 mm tube formats and need consistent, easy-to-handle closures without elaborate hardware.
This article is part of Rubber & silicone stoppers, in Stoppers, caps & closures.
Key features
- Pack size: 20 pc(s)
- Product type: Stopper
- Material: PP
- For tube diameter: Ø 16 mm
- Weight: 0,045 kg
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Stopper, PP, for tubes Ø 16 mm, 20 unit(s)
What is this article?
Stopper, PP, for tubes Ø 16 mm, 20 unit(s) is the article on this page. Luminix Health distributes Nalgene for laboratory use. It sits in Rubber & silicone stoppers, inside Stoppers, caps & closures, in Labware.
A rubber or silicone stopper is pushed into a mouth. The size number corresponds to a top and bottom diameter. Silicone survives higher temperatures and more autoclave cycles. Natural rubber is attacked by oils and by some solvents.
A closure is the part that decides whether a bottle stays shut and whether the contents attack the seal. A ground-glass stopper matches a ground neck. A screw cap needs the right thread and a liner that survives the liquid. Rubber and silicone stoppers push into a mouth. The liner, not the colour of the cap, is the chemical choice. The vessels they close are indexed under ISO laboratory glassware.
Which category should I open next?
The category is Stoppers, caps & closures. The sub-category is Rubber & silicone stoppers. The catalogue is Labware.
Shelves beside this one are Screw caps & closures, Ground-joint glass stoppers, Lids & seals and Closures (other).
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.






















