Description
Test sieve 200/50 mm MW = 0,85 mm ISO 3310-1 is a precision laboratory sieve for particle-size analysis and fractionation of powders or granular materials. The unit has a 200 mm diameter and 50 mm height; both the rim and the woven mesh are fabricated from stainless steel to provide mechanical stability and corrosion resistance during repeated analytical use. Mesh width is specified at 0,85 mm in accordance with ISO 3310-1, ensuring defined aperture geometry for reproducible separation results in quality-control and research environments. Supplied as a single piece with a net weight of 0,5 kg, this sieve from manufacturer Fritsch integrates readily into standard sieve stacks and shakers. The same mesh specification is also offered in alternative frame sizes (for example 200 mm diameter with 25 mm height, 8-inch frames, or 100 mm diameter), allowing laboratories to match existing equipment while retaining the identical aperture standard. The robust stainless-steel construction supports routine dry or wet sieving protocols without compromising mesh integrity, making the sieve suitable for material characterisation, sample preparation and compliance testing workflows that demand consistent cut-points.
This article is part of Test sieves (wire mesh), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 200 mm
- Height: 50 mm
- Mesh width: 0,85 mm
- Material: Stainless steel (rim and mesh)
- Standard: ISO 3310-1
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about test sieve 200/50 mm mesh = 0.85 mm ISO 3310-1
What is this article?
test sieve 200/50 mm mesh = 0.85 mm ISO 3310-1 is the article on this page. Luminix Health distributes Fritsch for laboratory use. It sits in Test sieves (wire mesh), inside Test sieves & mills, in Lab instruments.
A wire-mesh test sieve sorts particles through a woven opening of a stated nominal size. The frame diameter and the mesh are the specification. A sieve without a certificate is a screen, not a measurement.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Test sieves (wire mesh). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (perforated plate), Mills, grinders & homogenisers, Sieve shakers and Sieve accessories (lids, pans, rings).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
