Description
Test sieve 400/65 mm with mesh width #3 1/2 ASTM (5,6 mm) is a precision laboratory sieve for particle-size analysis to ASTM E-11-1995. It combines a 400 mm diameter frame with a 65 mm useful height, giving practical sample capacity for analytical and quality-control workflows. The defined mesh opening of 5,6 mm corresponds to ASTM designation 3 ½ and supports reproducible fractionation of granular and powdered materials. This analysis sieve from manufacturer Fritsch is intended for standardised dry or wet sieving where consistent aperture size is essential. Supplied as one piece with a net weight of 1,6000 kg, it fits readily into conventional sieve stacks and shaker systems used in research, industrial and materials-testing laboratories. Clear ASTM mesh identification simplifies method documentation and method transfer between sites. The unit is suited to particle characterisation, material classification and routine compliance testing. Complementary mesh widths and diameters in the same range allow laboratories to assemble complete analytical sieve sets for multi-fraction separations.
This article is part of Test sieves (wire mesh), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Frame size: 400/65 mm
- Mesh width: 5,6 mm
- ASTM designation: #3 1/2
- Standard: ASTM E-11-1995
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about test sieve 400/65 mm mesh = #3 1/2 ASTM (5.6 mm)
What is this article?
test sieve 400/65 mm mesh = #3 1/2 ASTM (5.6 mm) is the article on this page. Luminix Health distributes Fritsch for laboratory use. It sits in Test sieves (wire mesh), inside Test sieves & mills, in Lab instruments.
A wire-mesh test sieve sorts particles through a woven opening of a stated nominal size. The frame diameter and the mesh are the specification. A sieve without a certificate is a screen, not a measurement.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Test sieves (wire mesh). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (perforated plate), Mills, grinders & homogenisers, Sieve shakers and Sieve accessories (lids, pans, rings).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.