Sodium hydroxide volumetric solution, 1 mol/l - 1 N, Reag. Ph.Eur., 1 l, plastique

Catalog nr. 6785.1
Carl Roth

Volume: 1 liter
Quantité: 1 pièce
Prix:
Prix réduit€33,25
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

Sodium hydroxide volumetric solution est un titrant 1 mol/l - 1 N spécifié comme Reag. Ph.Eur. pour un titrage acide–base robuste et le travail d’étalonnage. Il correspond au numéro CAS 1310-73-2, à la formule empirique NaOH et à la masse molaire 40.01 g/mol, avec EG nr. 215-185-5. La densité est de 1.04 g/cm³ et le point d’ébullition est de 100 °C. Le conditionnement plastique de 1 l fournit un étalon d’hydroxyde prêt à l’emploi pratique pour l’analyse environnementale, les tâches sur réactifs et matériaux de référence, et les applications de solutions étalons. Proposé du fabricant Carl ROTH, cette solution volumétrique de force plus élevée convient aux laboratoires qui ont besoin d’un titre 1 N pour la préparation d’échantillons, la neutralisation et les protocoles de titrage quantitatif. Un étiquetage de concentration défini (1 mol/l - 1 N) soutient une détection cohérente du point final et la validation de méthode. Appliquez-la dans des conditions de laboratoire contrôlées en suivant les procédures volumétriques établies pour les réactifs sodium hydroxide.

Cet article fait partie de Solutions étalons volumétriques (titrage), dans Étalons analytiques & matériaux de référence.

Caractéristiques

  • Concentration en quantité de matière (20 °C): 1 mol/l
  • Incertitude de mesure: ±0.1 %
  • Numéro CAS: 1310-73-2
  • Conditionnement: 1 l plastique
  • Formule brute: NaOH
  • Masse molaire: 40.01 g/mol
  • Concentration: 1 mol/l - 1 N
  • Fiche technique: PDF
  • Fiche de données de sécurité: PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS05 Danger

Hazard Statements (H-Phrases)

H290 May be corrosive to metals
H314 Causes severe skin burns and eye damage

Precautionary Statements (P-Phrases)

P260 P260 – No description available
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P501 P501 – No description available

Récemment consulté

Vous aimerez peut-être aussi

Questions about Sodium hydroxide volumetric solution, 1 mol/l - 1 N, Reag. Ph.Eur., 1 l, plastique

What is this article?

Sodium hydroxide volumetric solution, 1 mol/l - 1 N, Reag. Ph.Eur., 1 l, plastique is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Solutions étalons volumétriques (titrage), inside Étalons analytiques & matériaux de référence, in Produits chimiques.

A volumetric standard solution is a reagent of stated concentration for titration, such as a stated molarity of acid, base or silver nitrate. The factor or the exact titre is on the certificate. Using the nominal molarity when a factor is printed is a systematic error.

A reference material is the article against which another result is compared. Its value is stated, and the uncertainty of that value is part of the product. An ICP or ion standard is a solution of known concentration. A volumetric standard is for titration. A chromatography standard is the peak you match. The grade names, including pharmacopoeia and ASTM, say which impurities were limited. Identity is checked on PubChem. Names follow IUPAC. Medicinal grades follow the European Pharmacopoeia and USP.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?